105
Sh
oo
ting
Fu
nctio
ns
4
Sets the focusing point when shooting with the viewfinder.
The selected focus point will light red in the viewfinder (Superimpose AF
Area).
1
Press the
M
button in standby mode.
The control panel appears.
2
Use the four-way controller (
2345
) to select [AF Active
Area], and press the
4
button.
The [AF Active Area] screen appears.
3
Use the four-way controller (
45
) to
select a focus point selection mode,
and press the
4
button.
The camera returns to the control panel.
Selecting the Focusing Point (AF Point)
b
Auto (5 AF
Points)
Out of the 5 AF points, the camera selects the optimum AF
point even if the subject is not centered. (default setting)
c
Auto (11 AF
Points)
Out of the 11 AF points, the camera selects the optimum AF
point even if the subject is not centered.
S
Select
Sets the focusing point to the user selected point from eleven
points in the AF frame.
O
Spot
Sets the focusing point to the center of the viewfinder.
• You can also change the setting from [AF Active Area] in [AF Settings]
of the [
A
Rec. Mode 2] menu.
• The selected focus point will not light red in the viewfinder when [Off] is
selected for [15. Superimpose AF Area] in the [
A
Custom Setting 3] menu.
• The focus point selection mode is fixed to
O
regardless of this setting
when using lenses other than DA, DA L, D FA, FA J, FA or F lenses.
AF Active Area
AF Active Area
Auto (5 AF Points)
Auto (5 AF Points)
OK
OK
OK
Cancel
Cancel
MENU
AUTO
K-50_ENG.book Page 105 Tuesday, June 4, 2013 10:35 AM