220
Ch
an
gi
ng Ad
di
tion
al
Se
tting
s
7
2
Press the four-way controller (
2
) to select [Reset], and press
the
4
button.
The settings are reset, and the screen that was displayed before
selecting the menu item appears again.
You can check the version information for software (firmware) in the
camera. If an update file for the firmware is released, you can update
the camera to the latest firmware version.
1
Select [Firmware Info/Options] in the [
R
Set-up 4] menu,
and press the four-way controller (
5
).
The firmware version for the camera is
displayed on the [Firmware Info/Options]
screen.
At this point, if an update file is saved
on your SD Memory Card, you can run
the update.
2
Press the
3
button twice.
The screen that was displayed before selecting the menu item appears again.
Checking the Camera Version Information
Visit our website for more information and procedural details regarding
updates.
•
You cannot restore a camera to its previous firmware version after updating it.
•
Before running the update, be sure to save the data on your SD Memory Card
to a computer or other location.
•
When the battery level is low, [Not enough battery power remaining to update
the firmware] is displayed on the monitor. Install a fully charged battery, or
use the optional AC adapter kit.
MENU
Firmware Info/Options
Firmware Info/Options
Camera
Camera
Ver:X.XX
Ver:X.XX
K-50_ENG.book Page 220 Tuesday, June 4, 2013 10:35 AM