198
Pl
ayb
ack F
unc
tion
s a
nd
Ima
ge
Ed
itin
g
6
Developing RAW Images
You can convert captured RAW images into JPEG images, and save them
as new files.
1
Select a RAW image in the single image display, and press
the four-way controller (
3
).
The playback mode palette appears.
2
Use the four-way controller (
2345
) to select
h
(RAW
Development), and press the
4
button.
The screen to select a development method is displayed.
3
Use the four-way controller (
23
) to
select [Developing a single image],
and press the
4
button.
The parameters saved in the image file
appear.
Proceed to Step 6 if you do not need
to change the parameters.
If there are no images that can be
processed, [No image can be processed] appears.
4
Use the four-way controller (
23
)
to choose the parameter you want
to change.
You can select a different image by
turning the front e-dial (
R
).
Only RAW images captured with this camera can be edited. RAW images
captured with other cameras cannot be edited on this camera.
Developing One RAW Image
MENU
OK
OK
OK
Developing a single image
Developing a single image
Developing multiple images
Developing multiple images
MENU
OK
Image Capture Settings
Image Capture Settings
100-0001
100-0001
K-50_ENG.book Page 198 Tuesday, June 4, 2013 10:35 AM