![background image](/i/pentax/155786/pentax-optio-i-10-en/h/pentax-optio-i-10-en-113.png)
112
3
Ta
kin
g
Pictur
es
Have a blank sheet of white paper or similar material ready.
1
In the [White Balance] screen, use the four-way
controller (
23
) to select
K
(Manual).
2
Point the camera at the blank
sheet of paper or other
material so that it fills the
frame displayed in the center
of the screen.
3
Press the shutter release button fully.
The white balance is automatically adjusted.
4
Press the
4
button.
The setting is saved and the [
A
Rec. Mode] menu reappears.
5
Press the
3
button.
The camera returns to capture status.
You can set the area of the screen where the brightness is metered to
determine the exposure.
1
Press the
3
button in
A
mode.
The [
A
Rec. Mode] menu appears.
To Set the White Balance Manually
Setting the AE Metering
L
Multi-segment
metering
The camera divides the image into 256 areas, meters the
brightness and determines the exposure.
M
Center-weighted
metering
The camera takes a reading of the overall brightness of the
picture with the center of the image having more influence
on the exposure.
N
Spot AE metering
The camera determines the exposure by metering the
brightness only at the center of the image.
OK
OK
OK
OK
MENU
MENU
Cancel
Cancel
OK
OK
MENU
Cancel
White Balance
Adjust
Adjust
Adjust
SHUTTER
SHUTTER
Adjust
SHUTTER
e_kb494.book Page 112 Wednesday, February 3, 2010 5:12 PM