![background image](/i/pentax/155786/pentax-optio-i-10-en/h/pentax-optio-i-10-en-208.png)
207
7
S
e
ttings
3
Press the four-way controller (
5
).
A pull-down menu appears.
4
Use the four-way controller
(
23
) to select the time until
the camera enters power
saving mode.
Choose from [2min.], [1min.], [30sec.],
[15sec.], [5sec.] or [Off].
5
Press the
4
button.
The setting is saved.
You can set the camera to turn off automatically when no operation is
performed for a fixed time.
1
Press the
3
button in
Q
mode.
The [
W
Setting] menu appears.
When you press the
3
button in
A
mode, press the four-way
controller (
5
) once.
2
Use the four-way controller (
23
) to select [Auto Power
Off].
3
Press the four-way controller (
5
).
A pull-down menu appears.
• Power Saving does not function in the following situations:
- While taking pictures in
j
(Continuous Shooting) mode
- In the playback mode
- While recording a movie
- While the camera is connected to a computer
- When using the AC adapter
- While a menu is being displayed
• When no operation is performed after the camera is turned on, Power
Saving is activated only after 15 seconds elapse even if [5sec.] is set.
Setting Auto Power Off
MENU
Off
5sec.
15sec.
30sec.
1min.
2min.
Setting
2/3
Cancel
Power Saving
Auto Power Off
Video Out
Brightness Level
Eye-Fi
USB Connection
OK
OK
e_kb494.book Page 207 Wednesday, February 3, 2010 5:12 PM