2
Getting Started
28
The selected capture mode
is displayed on the monitor
(Guide Display).
4
View the subject on the monitor.
5
When using a zoom lens,
turn the zoom ring to the right
or left to adjust the
composition of the image.
6
Position the subject inside
the AF frame and press
the shutter release button
halfway.
The AF frame turns green and
you will hear a beep when the
subject comes into focus.
y
Setting the Sound Effects (p.18)
7
Press the shutter release button fully.
The captured image is displayed on the monitor (Instant Review).
Available operations
y
Setting the display for Instant Review (p.16)
Review the captured image on the monitor.
1
Press
B
.
The camera enters playback
mode and the most recently
captured image is displayed
(single image display).
2
Review the captured image.
Available operations
t
Memo
• When
J
v
is displayed on the monitor, the JPEG image
that was just taken can also be saved in RAW format (Save
RAW Data).
L
Deletes the image.
J
Saves the RAW image.
Auto Picture
Auto Picture
OK
1/
2000
1/
2000 F2.8
F2.8
1600
1600
37
37
AF frame
Reviewing Images
C
Displays the previous image.
D
Displays the next image.
L
Deletes the image.
V
to the right
Magnifies the image (up to 16×).
Use
ABCD
to change the display area.
Press
M
to return the display area
to the center.
V
to the left
Thumbnail display (p.51)
J
Saves the RAW image (only when
the data is available).
G
Changes the type of information
displayed (p.11)
Q-7_OPM_eng.book Page 28 Tuesday, July 30, 2013 1:56 PM