![background image](/i/samsung/106066/samsung-bd-c5500/h/samsung-bd-c5500-028.png)
English
Setup
Before Starting (Initial Settings)
Turn on your TV after connecting the product.
(When the product is connected to TV for the
first time, product will turn on automatically and
the Initial Settings screen will be displayed.)
Press the ▲▼ buttons to select desired
language, then press the
ENTER
button.
Press the
ENTER
button to select
Start
button.
Press the ▲▼ buttons to select the desired
TV Aspect ratio, then press the
ENTER
button. (See page 30)
1.
2.
3.
4.
Press the ◄► buttons to the select the
desired Network Settings:
Wired
,
Wireless
or
PBC (WPS)
, then press the
ENTER
button.
(See pages 36~39)
The Network Test will start and Initial Settings
will be completed.
Press the
OK
button.
The home menu will be displayed. (For more
information about home menu, please see
page 29)
Home Menu
NOTE
When the product is connected to TV for the first
time, product will turn on automatically.
Do not confuse because this is not malfunction.
The home menu will not be displayed if you do not
configure the initial settings.
If you press the
BLUE(D)
button during the network
setup, you can access the home menu even if the
network setup is not completed yet.
When you return to home menu, the full screen
mode will be cancelled automatically.
If you want to display Initial Setting screen again
in order to make changes, press the
STOP
( )
button on the front panel of the product for more
than 5 seconds with no disc inserted.
Use the HDMI cable to connect the product to an
Anynet+(HDMI-CEC)
-compliant Samsung TV.
If the TV uses a language supported by the product,
that language will be set to a preferred language
automatically.
However, the
Anynet+(HDMI-CEC)
feature should
be set to
On
in both TV and the product.
5.
6.
•
✎
▪
▪
▪
▪
▪
▪
>
Move
"
Select
Initial Settings I On-Screen Language
Select a language for the on-screen displays.
English
Français
Deutsch
Español
Italiano
Nederlands
a
Previous
"
Select
Initial Settings
TV Aspect and Network will be set.
Each setting may be changed later under "Settings"
Start
a
Previous
d
Skip
<
Move
"
Select
Initial Settings I Network
Network Setting is needed to use various Internet services.
Choose the primary method for connecting to network.
Wired : Set the network by using Ethernet cable.
Please make sure that Ethernet cable is connected.
Wired
Wireless
PBC (WPS)
internet radio
You Tube
No Disc
a
Change Device
d
View Devices
"
Enter
Please activate Internet@TV service
to enjoy a variety of Internet Services.
01854U-BD-C5500-XER-ENG.indb 28
2010-03-03 오후 10:42:43