English - 33

Network Setup

Network Type

Select Cable or Wireless as the method to connect to the network.

The menu is activated only if the ‘Samsung Wireless LAN Adapter’ is connected.

Cable

: Connect to network using a cable.

Connect to network using a cable.

Wireless

: Connect to network wirelessly.

Connect to network wirelessly.

 Network Setup

Cable Network Setup 

(when 

Network Type

 is set to 

Cable

)

Please check if the LAN cable is connected.

Internet Protocol Setup

 →

→ 

Auto / Manual

Network Test

: You can test or confirm the network connection status after setting up the network.

You can test or confirm the network connection status after setting up the network.

When unable to connect to a wired network

If your Internet service provider has registered the MAC address of the device used to connect to the Internet for the first time 

and authenticates the MAC address each time you connect to the Internet, your TV may not be able to connect to the Internet 

as the MAC address differs from that of the device (PC).  

In this case, ask your Internet service provider about the procedures to connect devices other than your PC (such as your TV) 

to the Internet. If your Internet service provider requires an ID or password to connect to the Internet (network), your TV may not 

be able to connect to the Internet. In this case, you have to enter your ID or password when connecting to the Internet using an 

Internet Sharer (Router).

The internet connection may failure to a firewall problem. In this case, contact your Internet service provider. If you cannot 

connect to the Internet even if you have followed the procedures of your Internet service provider, please contact a Samsung 

Electronics.

Cable Network Setup

Cable Network Setup-Auto

If you connect the LAN cable and it supports DHCP, the Internet Protocol (IP) Settings are automatically configured.

1. 

Set 

Network Type

 to 

Cable

.

. 

Select 

Cable Network Setup

.

3. 

Set 

Internet Protocol Setup

 to 

Auto

.

The Internet Protocol is set automatically.

4. 

Select 

Network Test 

to check the network connectivity.

Cable Network Setup-Manual

To connect the TV to the LAN using a static IP address, you must set up the Internet Protocol (IP). 

Please check if the LAN cable is connected. (See page 30)

1.

  Set 

Network

Type

 to 

Cable

.

.

  Select 

Cable Network Setup

.

3.

  Set 

Internet Protocol Setup

 to 

Manual.

4.

  Set up

 IP Address

, 

Subnet Mask

, 

Gateway

 and 

DNS Server

.

Press the number buttons on the remote control when you set the Network manually.

5.

  Select 

Network Test

 to check the network connectivity.

Wireless Network Setup

The menu is activated only if the ‘Samsung Wireless LAN Adapter is connected. (See page 32)

Internet Protocol Setup

 →

→ 

Auto / Manual

Network Test

: You can test or confirm the network connection status after setting up the network.

When unable to connect to an AP

Your TV may fail to locate an AP that is configured as a private SSID type. In this case, please change the AP settings and try 

again. If your Internet service provider has registered the MAC address of the device used to connect to the Internet for

the first time and authenticates the MAC address each time you connect to the Internet, your TV may not be able to connect to 

the Internet as the MAC address differs from that of the device (PC).

In this case, ask your Internet service provider about the procedures to connect devices other than your PC (such as your TV) 

to the Internet. If you cannot connect to the Internet even if you have followed the procedures of your Internet service provider, 

please contact a Samsung Electronics. 

❑

N

•
•

❑



N

•
•

N

❑



N



N

N

❑

N

•
•

N

Setup

Game Mode 

: Off

BD Wise 

: Off

Network Type  

: Cable 

►

Network Setup
Child Lock 

: On

Change PIN
Parental Lock
Subtitle
Teletext Language
Preference

BN68-02113E-Eng.indb   33

2009-04-09   오후 3:54:10