en

9

Controls

Fig. 

"

Note

When the appliance is not used for some 

time, the display on the fascia switches 

to ECO mode.

Switching 

the appliance on

1. Press the On/Off button 

!

/10. 

Warning signal is emitted.

2. Press the alarm button 

"

/7. Warning 

signal stops.

The alarm button 

"

/7 remains lit until 

the set temperature has been reached.
The factory has recommended 

the following temperatures:

■

Refrigerator compartment: +4 °C

■

Freezer compartment:  –18 °C

Operating tips

■

When the appliance has been 

switched on, it may take several hours 

until the set temperatures have been 

reached.

■

The fully automatic NoFrost system 

ensures that the freezer compartment 

remains free of ice. Defrosting is no 

longer required.

■

The sides of the housing are 

sometimes heated slightly. This 

prevents condensation in the area of 

the door seal.

■

If the freezer compartment door 

cannot be immediately re-opened after 

it has been closed, wait until the 

resulting low pressure has equalised.

1

Selection button for refrigerator 

compartment

Is used to set the temperature 

in the refrigerator compartment.

2

Temperature display refrigerator 

compartment

The numbers correspond 

to the set refrigerator 

compartment temperatures in °C.

3

“Super” button refrigerator 

compartment

Switches super cooling on and 

off.

4

Selection button for freezer 

compartment

Is used to set the temperature 

setting for the freezer 

compartment.

5

Temperature display freezer 

compartment

The numbers correspond 

to the set freezer compartment 

temperatures in °C.

6

“Super” button (freezer 

compartment)

Switches super freezing 

on and off.

7

Alarm button

Used to switch off the warning 

signal, see chapter “Alarm 

function”.

8

Setting buttons +/-

The buttons are used to set the 

temperatures of the refrigerator 

and freezer compartment.

9

Energy saving mode display

It is lit when the appliance is not 

in use.