![background image](/i/uni-t/146637/uni-t-utm-1231-ut231/h/uni-t-utm-1231-ut231-011.png)
9
Model UT231: OPERATING MANUAL
Operation Performed
AC Voltage (main display) + Frequency
(secondary display)
AC Current (main display) + AC Voltage
(secondary display)
Active power (main display) + Phase
angle (secondary display)
Apparent power (main display) +
Reactive power (secondary display)
Power factor (main display) + Phase
angle (secondary display)
Active Energy (main display) + Time
(secondary display)
Temperature
(main display) +
Temperature (secondary display)
Press
LOAD
once, MR icon shown, the
Meter displays the next stored reading,
the left secondary display showing the
index increase one.
Press
USB
once to turn the USB
Button
MENU
Operation Performed
interface on, USB appears and the Meter
beeps.
Press
USB
again to turn the USB
interface off, USB disappears and the
Meter beeps.
It is invalid at active energy mode.
Press once to enter
LOAD
mode, MR
appears and the Meter beeps.
Press again to exit
LOAD
mode, MR
disappears and the Meter beeps.
Press and hold
LOAD
for 1 second to
display the stored data quickly.
Button
USB
USB
LOAD
Calibrating data. It is not recommended to
calibrate the meter without authorization.
CAL
SAVE
Press once to store single reading, MEM
appears and the Meter beeps.
Press and hold for over 1 second to
continuous store reading, MEM blinks
and the Meter beeps. The index number