16

Model UT231: OPERATING MANUAL

C. Active Power (main display) + Phase Angle
    (secondary display) Measurement 

(see figure 6)

Figure 6

starts recording the maximum AC current True RMS
value.
Press

 MAX/MIN

 again, the LCD displays MIN, it

starts recording the minimum AC current True RMS
value.
Press 

MAX/MIN

 again to show the present AC

current True RMS value.
The display shows 

OL

 when the current of the

tested conductor is higher than 1000A rms.

6.

7.

8.

When the measurement has been completed,
disconnect the connection between the conductor
under test and the jaw, and remove the conductor
away from the transformer jaw of the Meter.

Note

Brack

Red