![background image](/i/vitek/148743/vitek-vt-1236-vt/h/vitek-vt-1236-vt-007.png)
7
ENGLISH
•
After you finish ironing, switch the unit off,
wait until it cools down completely, then
open the water inlet lid (2), turn over the iron
and pour out the remaining water.
STEAM CHAMBER CLEANING
To prolong lifetime of the iron we recommend
cleaning the steam chamber regularly,
especially in the regions with hard tap water.
•
Set the continuous steam supply knob (3) to
the position «
».
•
Fill the water tank (9) till the «
MAX
» mark
(12).
Note: Do not fill the water tank with scented
liquids, vinegar, starch solution, descaling
reagents, chemical agents etc.
•
Place the iron on its base (8).
•
Insert the power plug into the mains socket.
•
Set the control knob (10) to the maximum
soleplate temperature «
MAX
», the indicator
(7) will light up.
•
When the iron soleplate (13) reaches the set
temperature, the pilot lamp (7) will go out.
Wait until the iron soleplate is reheated, then
you can start cleaning of the steam cham-
ber.
•
Unplug the unit.
•
Hold the iron above a sink horizontally, press
and hold the «
Self Clean
» button (11).
•
Boiling water and steam with scale will be
released from the iron soleplate (13) open-
ings.
•
Slightly swing the iron back and forth, until
water goes out of the water tank (10).
•
Place the iron on the base (8) and let it cool
down completely.
•
When the soleplate (13) cools down com-
pletely, wipe it with a dry cloth.
•
Before you take the iron away for storage,
make sure that there is no water in the water
tank (9) and that the soleplate (13) is dry.
Cleaning and care
•
Before cleaning the iron, make sure that it
is unplugged and has cooled down com-
pletely.
•
Clean the iron body with a slightly damp
cloth and then wipe it dry.
•
Scale on the iron soleplate can be removed
with a cloth soaked in vinegar-water solu-
tion.
•
After removing scale, polish the soleplate
surface with a dry cloth.
•
Do not use abrasive substances and sol-
vents to clean the iron soleplate and body.
•
Avoid contact of the iron soleplate with
sharp metal objects.
Storage
•
Before you take the iron away for storage,
clean it and pour out all the remaining water
from the water tank (9).
•
Set the temperature control knob (10) to the
«
MIN
» position, set the continuous steam
supply knob (3) to the position «
».
•
Wind the power cord on the iron base.
•
Store the iron vertically in a dry cool place,
out of the reach of children.
Delivery set
Iron – 1 pc.
Beaker – 1pc.
Instruction manual – 1 pc.
Technical specifications
Power supply: 220-240 V ~ 50/60Hz
Maximal power consumption: 2600 W
The manufacturer preserves the right to
change the specifications of the unit without a
preliminary notification.
Unit operating life is 3 years
Guarantee
Details regarding guarantee conditions can be
obtained from the dealer from whom the appli-
ance was purchased. The bill of sale or receipt
must be produced when making any claim un-
der the terms of this guarantee.
This product conforms to the EMC-Requirements as
laid down by the Council Directive 2004/108/ЕС and
to the Low Voltage Regulation (2006/95/ЕС)
VT-1236.indd 7
02.12.2013 9:20:53