![background image](/i/zelmer/157768/zelmer-sb1001/h/zelmer-sb1001-048.png)
52
SB1001-001_v01
MIN
– minimum speed
– normal speed
MAX
– maximum speed
In the manual rotation speed setting mode the intensity of
ring illumination depends on a blade rotation speed (the
higher the rotation speed, the more intense the illumination).
Controls and Operation
B
PREPARING THE APPLIANCE FOR OPERATION
Wash the blender jug
(5)
, lid
(7)
and stopper
(9)
in warm
water with washing-up liquid, rinse thoroughly and dry before
the first use (or after the jug blender was stored unused for
a long period of time).
Be careful with the sharp blades.
CONTROL PANEL
The stand blender has a knob with an illuminated ring
that goes on when the appliance is running. You can
use the knob
(a)
to select any speed between
„
MIN”
and
„
MAX”
. To do so, turn the knob and set it in
a required position.
Set the knob in the
“ON”
position to use one of the three
available quick start programmes (
“PULSE”
,
“JUICE”
,
“ICE”
). The illuminated ring will go on, and the program
selection buttons will start blinking.
CONTROLS AND OPERATION
A stand blender is designed for chopping
and mixing various kinds of products. It can
be used to prepare soups, sauces and milk
shakes, you can also mix vegetables, fruits and
meat, as well as pound cooked ingredients into
food for the infants.
1
Place the motor unit
(1)
on a dry, level and stable surface
near a mains socket. Make sure that the motor unit is placed
out of the reach of children.
Do not let the cord hang over the edge of a table
or work surface to prevent accidental pulling or
catching.
2
Plug the cord into the mains socket.
Before plugging the appliance to the mains,
make sure that the turning knob (a) has been
set to the “OFF” position.
3
Mount the blender jug
(5)
onto the motor unit so that the
symbol on the motor unit
(1)
is in line with mark on
the jug.
4
Lock the blender jug
(5)
in place, turning it clockwise so
that the symbol on the motor unit
(1)
is in line with the
mark on the jug.
Technical specification
Technical parameters are indicated on the nameplate of the
product.
Admissible time of uninterrupted operation: 3 minutes.
The time interval between two successive processes of
mixing: 10 minutes.
Maximum noise level: 76 dB/A.
The stand blender is built in 2nd isolation class. It does not
require connection to the socket equipped with grounding
pin.
The stand blender meets the requirements of standards in
force.
The appliance meets the requirements of the directives:
Low Voltage Device (LVD) – 2006/95/EC.
–
Electromagnetic compatibility (EMC) – 2004/108/EC.
–
The product is marked with CE mark on the nameplate.
Appliance elements
A
1
Motor unit
2
Control panel
3
Anti-slip foot
4
Cord storage compartment
5
Blender jug with level indication
6
Jug handle
7
Jug lid
8
Lid sieve
9
Lid stopper with level indication
10
Attachment for centrifuging juice from soft fruit and soy
beans
11
Blade unit
12
Sealing ring
13
Grinder
14
Grinder container
15
Grinder sealing ring
16
Grinder base with blade unit
PANEL STEROWANIA
a
Turning knob
b
“PULSE”
button – enables the user to run the momentary
blending programme at the highest speed
c
„JUICE”
button – enables the user to run the juice
extraction programme
d
“ICE”
button – enables the user to run the ice-crushing
programme
SPEED REGULATION – TURNING KNOB
OFF
– the appliance is switched off
ON
– the appliance is ready for use in the
“PULSE”
,
“JUICE”
or
“ICE”
mode (blue ring illumination around
the knob is on)