46
PI-003_v02
Display and control of errors
The most common problems together with the remedies are
described below.
In case of a malfunction, the induction hob will automatically
switch on the protective mode and one of the following codes
will be displayed:
F0
/
F1
/
F2
– NO VENTILATION – contact the service center.
F3
-
F8
– INCORRECT VOLTAGE – switch the appliance off
and switch it back on. If the problem persists, contact the
service center.
E3/E4
– INCORRECT TEMPERATURE – check the utensil.
E5/E6
– INCORRECT HEAT DISTRIBUTION – switch off the
appliance, allow to cool down and switch it back on.
Never attempt to repair the appliance by yourself!
Ecology – environment protection
Each user can protect the natural environment. It is neither
dif
fi
cult nor expensive.
In order to do it: put the cardboard packing into
recycling paper container; put the polyethylene
(PE) bags into container for plastic.
When worn out, dispose the appliance to
particular disposal centre, because of the
dangerous elements of this appliance, which
can be hazardous for natural environment.
Do not dispose into the domestic waste disposal!!!
The manufacturer/importer does not accept any liability for any
damages resulting from unintended use or improper handling.
The manufacturer/importer reserves his rights to modify the product
any time in order to adjust it to law regulations, norms, directives,
or due to construction, trade, aesthetic or other reasons, without
notifying in advance.