![background image](/i/bosch/29030/bosch-tes-559m1-ru/h/bosch-tes-559m1-ru-033.png)
29
TES55. | 05/2013
en
Water fi lter
A water fi lter can prevent scale buildup.
Before a new water fi lter is used, it must be
rinsed. To do this, proceed as follows:
1. Press the water fi lter fi rmly into the
water tank with the aid of the measuring
spoon (19).
2. Fill the water tank (17) with water up to
the
max mark.
3. Press and hold the
e
off /
j
button (13)
for at least three seconds. The menu
opens.
4. Press the
e
off /
j
button (13)
repeatedly until the display shows
No / Old filter
.
5. Select
Activate filter
with the upper
rotary knob (15).
6. Press the
start button (10).
7. Place a receptacle with a capacity of
0.5 litres under the outlet (6a).
8. Press the
start button (10).
9. Water will now fl ow through the fi lter to
rinse it.
10. Empty the container.
The appliance is ready to use once more.
Note: Rinsing the fi lter simultaneously
activates the setting for the
Change fil-
ter!
display.
The fi lter is no longer effective when the
Change filter!
display appears, or at
the latest after 2 months. It needs to be
replaced for reasons of hygiene and so that
there is no build-up of limescale (this could
damage the appliance). Replacement fi lters
can be obtained from retailers (TCZ7003) or
from customer service (575491). If no new
fi lter is used, turn the
filter
setting to
No / Old
.
Note: You can use the fi lter indicator to
mark the month in which you inserted the
fi lter. You can also mark the month in which
you will need to replace the fi lter next (at
the latest after two months).
Note: If the appliance has not been used
for a prolonged period (e.g. vacation) the
fi lter should be rinsed before the appliance
is used again. To do so, dispense a cup of
hot water and pour it away.
TES556M1RU_559M1RU.indb 29
04.06.2013 14:30:31