![background image](/i/bosch/29030/bosch-tes-559m1-ru/h/bosch-tes-559m1-ru-040.png)
36
Robert Bosch Hausgeräte GmbH
en
Tips on energy saving
● The fully automatic espresso machine
switches off automatically after one hour
(factory setting). The default time of
one hour can be shortened (see “Menu
settings”
Shut off
on page 30).
● Switch off the fully automatic espresso
machine when not in use. To do this,
press the
e
off /
j
button (13). The
appliance rinses and switches off.
● If possible, do not interrupt coffee or milk
froth dispensing. Cutting the coffee or milk
froth dispensing process short results in
higher energy consumption and in more
residual water collecting in the drip tray.
● Descale the appliance regularly to avoid
a build-up of limescale. Limescale residue
results in higher energy consumption.
Service Programmes
Tip: Refer also to the quick reference guide
in the storage compartment
(5c).
Depending on usage, the following
messages will appear on the display at
certain intervals:
Descale required!
or
Clean required!
or
Calc‘n‘Clean required!
The appliance should be cleaned or descaled
immediately using the corresponding pro-
gramme. You also have the option of com-
bining both processes with the Calc‘n‘Clean
function (see “Calc‘n‘Clean” on page 38).
If the service programme is not run as in-
structed, the appliance may be damaged.
¡
Warning!
Each time you run the service programme,
you should follow the instructions for using
the descaling and cleaning agents. Please
observe the safety instructions on the pack-
aging of the cleaning agent.
Never interrupt the service programme!
Do not drink the liquids!
Never use vinegar, vinegar-based products,
citric acid or citric acid-based products!
Never put descaling tablets or other descal-
ing agents in the ground coffee drawer or
the drawer for cleaning tablets (4)!
Specially developed descaling and
cleaning tablets are available from
retailers or customer service.
Order number
Retail
Customer
service
Cleaning
tablets
TCZ6001
310575
Descaling
tablets
TCZ6002
310967
Descaling
Duration: approx. 25 minutes.
Important: If there is a filter in the water
tank (17), it needs to be removed before the
descaling programme is run.
If the message
Descale required!
ap-
pears on the display, press the
e
off /
j
but-
ton (13) for 3 seconds and then press the
start button (10). The descaling programme
will start.
To descale the appliance before being
prompted, press the
e
off /
j
button (13) for
at least 3 seconds. Then press the
e
off /
j
button (13) briefly twice. Turn the upper
rotary knob (15) until
Start descaling
appears in the display. To start the descal-
ing procedure, press the
start button (10).
TES556M1RU_559M1RU.indb 36
04.06.2013 14:30:36