![background image](/i/bosch/29030/bosch-tes-559m1-ru/h/bosch-tes-559m1-ru-042.png)
38
Robert Bosch Hausgeräte GmbH
en
Calc‘n‘Clean
Duration: approx. 35 minutes.
Calc‘n‘Clean combines the separate func-
tions of descaling and cleaning. If both
programmes are due to be run soon, the
espresso machine automatically suggests
this service programme.
Important: If there is a filter in the water
tank (17), it needs to be removed before the
service programme is run.
If the message
Calc‘n‘Clean required!
appears on the display, press the
e
off /
j
button (13) for 3 seconds and then press
the
start button (10). The service pro-
gramme will start.
To run Calc‘n‘Clean before being prompted,
press the
e
off /
j
button (13) for at least
3 seconds. Then press the
e
off /
j
button
(13) briefly twice. Turn the upper rotary
knob (15) until
Start Calc‘n‘Clean
appears in the display. To start Calc‘n‘Clean,
press the
start button (10).
The display will guide you through the
programme.
Empty drip tray
Insert drip tray
● Empty drip tray (8) and replace it.
Calc‘n‘Clean in progress
The appliance rinses twice.
Open drawer
● Open the drawer (4).
Fill cleaner
● Drop a Bosch cleaning tablet in the
drawer (4)
and close.
N.B.: If the water filter is activated, the dis-
play will prompt you to remove the filter and
then press the
start button (10) again. Re-
move the filter now if you have not already
done so. Press the
start button (10).
Fill descaler
Press start
● Pour lukewarm water into the empty wa-
ter tank (17) up to the
0,5l mark and dis-
solve 2 Bosch descaling tablets in it.
● Press the
start button (10).
Place container
Press start
● Place a receptacle with a capacity of at
least 1 litre under the outlet (6a).
● Press the
start button (10).
Calc‘n‘Clean in progress
The descaling pro gramme will now run for
about 22 minutes.
Clean / Fill water tank
Press start
● Rinse the water tank (17) and refill it with
fresh water up to the
max mark.
● Press the
start button (10).
Calc‘n‘Clean in progress
The descaling pro gramme now runs for
about 10 minutes and rinses the appliance.
Empty drip tray
Insert drip tray
● Empty drip tray (8) and replace it.
Replace the filter if one is being used. The
appliance has finished cleaning is ready for
use again.
Important: Wipe down the appliance using
a soft, damp cloth to immediately remove
any descaler residue. Such residue can
cause corrosion. New sponge cloths may
contain salts. Salts can cause rust film
on stainless steel and must therefore be
washed out thoroughly before use.
TES556M1RU_559M1RU.indb 38
04.06.2013 14:30:36