![background image](/i/dell/153345/dell-1355cnw-1355cn/h/dell-1355cnw-1355cn-156.png)
Auto Receive
Sets the interval at which the printer goes into the fax receive
Answer/Fax
mode after the external answering machine receives an incoming
call.
Line Monitor
Sets the volume of the line monitor, which audibly monitors a
transmission through the internal speaker until a connection is
made.
Ring Tone
Sets the volume of the ring tone, which indicates that an
Volume
incoming call is a telephone call through the internal speaker
when
Receive Mode
is set to
Telephone/Fax
.
Line Type
Sets the line type.
Tone/Pulse
Sets the dialing type.
Resend Delay
Specifies the interval between transmission attempts.
Redial Attempts
Specifies the number of redial attempts to make when the
destination fax number is busy. If you enter 0, the printer will not
redial.
Redial Delay
Specifies the interval between redial attempts.
Junk Fax Setup
Sets whether to reject faxes sent from unwanted numbers by
accepting faxes only from the fax numbers registered in the Phone
Book.
Remote Receive
Sets whether to receive a fax by pressing a remote receive code on
the external telephone.
Remote Receive
Specifies the remote receive code in two digits to start
Remote
Tone
Receive
.
Fax Header
Sets whether to print the information of sender on the header of
faxes.
Fax Header
Sets the name of sender to be printed on the header of faxes. Up
Name
to 30 alphanumeric characters can be entered.
Fax Number
Sets the fax number of the printer to be printed on the header of
faxes.
Fax Cover Page
Sets whether to attach a cover page to faxes.
DRPD Pattern
Sets the DRPD setting from
Pattern 1
to
Pattern 7
. DRPD is a
service provided by some telephone companies.
Sent Fax Forward
Sets whether to forward incoming faxes to a specified destination.
Fax Forward
Specifies the fax number of the destination to which incoming
Number
faxes will be forwarded.
Dell Printer Configuration Web Tool
154