![background image](/i/dell/153345/dell-1355cnw-1355cn/h/dell-1355cnw-1355cn-179.png)
1-4
Trap
Trap Address Type
Select the trap address type from the list.
Notification
Selecting
Off
clears the settings in
Trap Address
,
Port Number
, and
Notify
, and does not notify
trap occurrence. Selecting
IPv4
or
IPv6
allows
you to enter
Trap Address
.
Trap Address
Specifies the IP address and IP socket in the
following format:
• IPv4
Specifies the IP address and IP socket in the
nnn.nnn.nnn.nnn:mmmmm format. Each
section of "nnn" is a variable value between 0
and 255. Note that values 127 and 224-254 are
not valid for the first three-digits only. IP socket
mmmmm is a variable value between 0 and
65535.
• IPv6
Specifies the IP address and IP socket in the
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:mmm
mm format. Each section of "xxxx" is a
hexadecimal variable value between 0 and ffff.
IP socket mmmmm is a variable value between 0
and 65535.
Trap Notification
Enter the SNMP trap destination port number.
(IP) Port Number
Notify
Specifies whether to notify trap occurrence.
Authenticate Error Trap
Specifies whether to notify Authenticate Error
Trap.
Scan to PC
Purpose:
To specify the client when scanning data.
Values:
FTP Client
Connection
Time-Out
FTP Passive
Sets the connection time-out period from 1 to 60
seconds.
Sets whether to enable the FTP Passive mode.
Dell Printer Configuration Web Tool
177