![background image](/i/dell/153345/dell-1355cnw-1355cn/h/dell-1355cnw-1355cn-354.png)
Receive
Mode
Telephone
Automatic fax reception is turned off. You can receive
a fax by picking up the handset of the external
telephone, pressing the remote receive code, and then
pressing .
Fax*
Automatically receives faxes.
Telephone/Fa
x
When the printer receives an incoming fax, the
external telephone rings for the time specified in
Auto
Rec Fax/Tel
, and then the printer automatically
receives a fax. If an incoming call is not a fax, the
printer beeps from the internal speaker indicating that
the call is a telephone call.
Ans
Machine/Fax
The printer can share a telephone line with an
answering machine. In this mode, the printer will
monitor the fax signal and pick up the line if there are
fax tones. If the phone communication is using serial
transmission in your country (such as Germany,
Sweden, Denmark, Austria, Belgium, Italy, France and
Switzerland), this mode is not supported.
DRPD
Before using the Distinctive Ring Pattern Detection
(DRPD) option, a distinctive ring service must be
installed on your telephone line by the telephone
company. After the telephone company has provided a
separate number for faxing with a distinctive ring
pattern, configure the fax setup to monitor for that
specific ring pattern.
Auto Rec Fax 0*
0–255
Sets the interval at which the printer goes into the fax
receive mode after receiving an incoming call.
Auto Rec
Fax/Tel
6*
0–255
Sets the interval at which the printer goes into the fax
receive mode after the external telephone receives an
incoming call.
Auto Rec
21*
Sets the interval at which the printer goes into the fax
Ans/Fax
receive mode after the external answering machine
0–255
receives an incoming call.
Understanding the Tool Box Menus
352