![background image](/i/dell/153345/dell-1355cnw-1355cn/h/dell-1355cnw-1355cn-382.png)
IPv4 Get IP
Address
AutoIP*
BOOTP
Automatically sets the IP address.
Uses BOOTP to set the IP address.
RARP
Uses RARP to set the IP address.
DHCP
Uses DHCP to set the IP address.
Panel
Enables the IP address entered on the operator
panel.
IP Address
Manually sets the IP address allocated to the printer.
Subnet Mask
Manually sets the subnet mask.
Gateway Address
Manually sets the gateway address.
Protocol
Purpose:
To enable or disable each protocol. The change becomes effective after the
printer is turned off and then on.
Values:
LPD
Disable
Disables the LPD port.
Enable*
Enables the Line Printer Daemon (LPD) port.
Port9100
Disable
Disables the Port9100 port.
Enable*
Enables the Port9100 port.
WSD
Disable
Disables the WSD port.
Enable*
Enables the WSD port.
SNMP
Disable
Disables the SNMP UDP port.
Enable*
Enables the Simple Network Management Protocol
(SNMP) UDP port.
E-Mail Alerts
Disable
Disables the E-Mail Alert feature.
Enable*
Enables the E-Mail Alert feature.
EWS
Disable
Disables an access to
Dell Printer Configuration
Web Tool
embedded in the printer.
Enable*
Enables an access to
Dell Printer Configuration
Web Tool
embedded in the printer.
Understanding the Printer Menus
380