![background image](/i/ecovacs/149216/ecovacs-atmobot-a3s/h/ecovacs-atmobot-a3s-007.png)
7
●
Keep the Robot away from hot sources such as
heater, fireplace, radiator, kitchen oven, direct
sunlight, etc., as the plastic could become
distorted and discolored.
Do not Drop
Ka
Cloth
cleaning
●
Do
NOT
drop the Robot, should this happen, run the Robot to see that
everything is okay before letting it operate by itself without you being
present.
●
Do
NOT
grasp the upper portion of the product as doing so may cause
damage to the product.
Use a DRY soft cloth for daily and weekly cleaning of the
plug, cord, Charger Dock and Robot. A damp soft cloth
that has been rung dry of water
could
be used to wipe the
surfaces for better cleaning. A
WET
cloth may
NOT
be
used as water may get into the Robot or Charger Dock
and cause electrical problems resulting in a Service Call.
Enjoy Smarter Life!
Power Supply for the Robot
●
E
●
●
●
●
●
●
The Robot's power supply is from a NI-MH rechargeable battery and only
accompanying COVACS' Charger Dock may be used.
Do
NOT
use the Robot if the power supply cord to the Charger Dock becomes
damaged. Call our 1-800 number or visit our Web Site for the nearest Service
Center to send the Charger Dock for repair.
Do
NOT
remove the plug from the wall receptacle by pulling on the power supply
cord as it may damage the cord or internal wiring. Grasp the plug to remove from
the receptacle.
Do
NOT
move the Charger Dock by pulling on the power supply cord as you may
damage internal wiring.
Do
NOT
twist or pinch the power supply cord to avoid damage to the insulation.
Keep power supply cord away from warm/hot places or sharp edges to avoid
damage to the insulation.
Turn the Robot
OFF
and remove the Charger Dock plug from the receptacle when
you are not using the Robot for an extended period of time.
Correct
Draw out
the plug