BIOS Setup

- 32 -

2-1  Startup Screen

The following screens may appear when the computer boots.

A. The LOGO Screen (Default)

B. The POST Screen 

Motherboard Model

 BIOS Version

Award Modular BIOS v6.00PG

Copyright (C) 1984-2011, Award Software, Inc.

AMD 870 BIOS for GA-870A-USB3L D2

.

.

.

.

<DEL>: BIOS Setup  <F9>: XpressRecovery2  <F12>: Boot Menu  <End>: Qflash

01/06/2011-RX870-SB850-7A66CG0GC-00

Function Keys

Function Keys: 
<TAB>: POST SCREEN
 

Press the <Tab> key to show the BIOS POST screen. To show the BIOS POST screen at system start-
up, refer to the instructions on the Full Screen LOGO Show item on page 42.

<DEL>: BIOS SETUP\Q-FLASH
 

Press the <Delete> key to enter BIOS Setup or to access the Q-Flash utility in BIOS Setup.

<F9>: XPRESS RECOVERY2
 

If you have ever entered Xpress Recovery2 to back up hard drive data using the driver disk, the <F9> 
key can be used for subsequent access to Xpress Recovery2 during the POST. For more information, 
refer to Chapter 4, "Xpress Recovery2."

<F12>: BOOT MENU
 

Boot Menu allows you to set the first boot device without entering BIOS Setup. In Boot Menu, use the up 
arrow key <h> or the down arrow key <i> to select the first boot device, then press <Enter> to accept. 
To exit Boot Menu, press <Esc>. The system will directly boot from the device configured in Boot Menu. 

Note: The setting in Boot Menu is effective for one time only. After system restart, the device boot order 
will still be based on BIOS Setup settings. You can access Boot Menu again to change the first boot de-
vice setting as needed.

<END>: Q-FLASH
 

Press the <End> key to access the Q-Flash utility directly without having to enter BIOS Setup first.

Function Keys