- 43 -

BIOS Setup

2-6  Integrated Peripherals

  OnChip SATA Controller (AMD SB850 South Bridge)

Enables or disables the SATA controller integrated in the AMD SB850 chip. (Default: Enabled)

  OnChip SATA Type (AMD SB850 South Bridge,  SATA3_0~SATA3_3 connectors)

Configures the operating mode of the integrated SATA3_0~SATA3_3 controller.

Native IDE  

Allows the SATA controller to operate in Native IDE mode. (Default)  

Enable Native IDE mode if you wish to install operating systems that support Native  

mode.

RAID   

Enables RAID for the SATA controller.

AHCI   

Configures the SATA controllers to AHCI mode. Advanced Host Controller Interface  

(AHCI) is an interface specification that allows the storage driver to enable advanced  

Serial ATA features such as Native Command Queuing and hot plug.

  OnChip SATA Port4/5 Type (AMD SB850 South Bridge,  SATA3_4/SATA3_5 connectors)

This option is configurable only when OnChip SATA Type is set to RAID or AHCI. Configures the oper- 

ating mode of the integrated SATA3_4/SATA3_5 connectors.

IDE   

Disables RAID for the SATA controller and configures the SATA controller to PATA  

mode. (Default)  

As SATA Type  The mode depends on the OnChip SATA Type settings. 

  OnChip SATA RAID5 Support (AMD SB850 South Bridge,  SATA3_0~SATA3_5 connectors)

Enables or disables RAID 5 support for the SATA controller integrated in the AMD SB850 South Bridge. 
This option is configurable only when OnChip SATA Type is set to RAID.  

  OnChip SATA3.0 Support 

Enables or disables the SATA 6Gb/s function integrated in the Chipset. When set to Disabled, the SATA 
controller will operate in SATA 3Gb/s mode. (Default: Enabled)

CMOS Setup Utility-Copyright (C) 1984-2011 Award Software

Integrated Peripherals

  OnChip SATA Controller 

[Enabled]

  OnChip SATA Type 

[Native IDE]

x  OnChip SATA Port4/5 Type 

 IDE

x  OnChip SATA RAID5 Support 

 Enabled

OnChip SATA3.0 Suuport 

[Enabled]

x  OnChip SATA Port as ESP 

 Press Enter

  Onboard LAN Function  

[Enabled]

  Onboard LAN Boot ROM 

[Disabled]



  SMART LAN    

[Press Enter] 

  Onboard Audio Function 

[Enabled]

  Onboard USB3.0 Controller 

[Enabled]

  USB Controllers   

                                                [Enabled]

   USB Legacy Function   

[Enabled]

  USB Storage Function   

[Enabled]

  Onboard Serial Port 1   

[3F8/IRQ4]

higf

: Move 

Enter: Select 

+/-/PU/PD: Value 

F10: Save 

ESC: Exit 

F1: General Help

F5: Previous Values 

F6: Fail-Safe Defaults   

F7: Optimized Defaults

Item Help

Menu Level 