4. When Find SYNC appears in the display, press OK.
5. Put your phone into
Bluetooth
discovery mode. Refer to your
phone’s user guide if necessary.
6. When prompted on your phone’s display, enter the six digit PIN
provided by SYNC in the radio display.
7. The display will indicate when the pairing is successful.
8. Depending on your phone’s capability and your market, the
system may prompt you with questions such as setting the current
phone as the primary phone (the phone SYNC will automatically try
to connect with first upon vehicle start-up), downloading your
phone book, turning on 911 Assist™ (if available), etc.
Note:
SYNC
威
can support downloading up to approximately 2,000
entries per
Bluetooth
enabled cellular phone.
Note:
If one phone has already been paired to SYNC, the process to pair
another is slightly different. To pair subsequent phones, please refer to
Pairing subsequent phones
in the following section.
Pairing subsequent phones
Once you have a phone paired with the system, the steps to pair another
phone is a bit different. To pair a subsequent phone:
Note:
To scroll through the menus, press
/
on your audio system.
Depending on your system, you may also be able to press
/
or
turn the TUNE knob.
1. Ensure that the vehicle ignition and radio are turned on and that
you are in P (Park).
2. Press PHONE or
and scroll until System Settings is selected.
3. Press OK and scroll until Bluetooth Devices is selected and press
OK.
4. Scroll until Add Bluetooth Device is selected and press OK.
5. When Find SYNC appears in the display, press OK.
6. Put your phone into
Bluetooth
discovery mode. Refer to your
phone’s user guide if necessary.
7. When prompted on your phone’s display, enter the six digit PIN
provided by SYNC in the radio display.
8. The display will indicate when the pairing is successful.
Phone features
11
See
End User License Agreement
at the end of this book
2012 SYNC/MGM
(mgm)
Supplement, 2nd Printing
USA
(fus)
