Инструкция для Loewe Tremo

(скачивание инструкции бесплатно)
Формат файла: PDF
Доступность: Бесплатно как и все руководства на сайте. Без регистрации и SMS.
Дополнительно: Чтение инструкции онлайн
background image

10

Connection

Connect the cubic socket on the DVD Preceiver to
the ”Master” cubic socket on the Tremo
subwoofer. Use the cubic plug cable provided
with the DVD Preceiver Auro (2-wire cable). Plug
the white plug (without kink protection) into the
cubic socket on the subwoofer.

If the Loewe TV speakers as of chassis MediaPlus
Q2500 are used for center reproduction, connect
the cubic socket on the TV with the ”Slave” cubic
socket on the subwoofer using the cubic plug
cable. Use the cubic plug cable provided with the
Tremo speaker system. Plug the white plug (with-
out kink protection) into the cubic socket on the
subwoofer. Set the ”Center to” switch on the
subwoofer to ”TV”.
If, on the other hand, you want to use the exter-
nal center speaker, do not connect the Slave to
the TV.

Set the ”Center to” switch on the subwoofer to
”Sat”.

Connect the TV set (Euro AV socket 3) to the DVD
Preceiver with the Euro AV cable.

Connect the TV (Service socket) to the L-Link
socket of the DVD Preceiver with the TV-L-Link
cable (provided with the DVD Preceiver).

This ensures that the Tremo speaker system is
switched on but the TV stays switched off in the
case of radio or CD playback from the DVD
Preceiver.

If the TV set is equipped with a DVB module with
Digital OUT terminal and/or the DIS module,
connect the digital output of the TV to the DIGI-
TAL IN input of the Auro system by a cinch cable
(if a DVB module with Digital-OUT and a DIS
module are available, use the DIS connection).
This ensures that the digital audio signal is fed to
the DVD Preceiver for decoding.

How to connect the satellite speakers is de-
scribed on page 14.

Settings on the DVD Preceiver
Auro 8116DT

In the DVD menu under Settings select ”Tremo”
as the speaker system, set the listener/speaker
distances and level the loudspeakers. See also
the DVD Preceiver manual (page 12 and 13).

ON

Line IN

Power OUT

OFF

Bass Intensity

Center to

System connector

230V~50/60Hz

Surr.

Front

Right

Surr.

Front

Subw. Left

Right Center Left

Slave

Master

R

R

L

C

L

Phase

Min.

Max.

TV

Sat

0

180

PREOUT

FR

FL 

SL SR 

SUB 

TO TV

TV 

EXT 

12V/15mA

L-Link

AV2/RGB

AV3

AV1

SAT

RC5/RC6

SAT A/D

AUDIO IN

SERVICE

AUDIO       OUT

VHF/UHF

R

IR

L

SUBWOOFER
STAND

VGA

CTRL

AM GND

FM (75 

)

L

L

R

R

AUX1 IN

DIGITAL

IN

DIGITAL

OUT

AUX OUT

AUX 2

DIG OUT

DIG IN

1

2

... to Loewe DVD Preceiver Auro 8116 DT
with Loewe TV set (from Loewe TV
MediaPlus Q2500, software 6.x)

If you use the Loewe DVD Preceiver in connec-
tion with a Loewe TV set, connect the Tremo
speaker system to the audio outputs of the DVD
Preceiver. See the instructions for laying the
cables on page 6.

BA31673_002Tremo_GB_5

31.08.2004, 13:18 Uhr

10

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Оглавление инструкции
  • Страница 1 из 19
    Operating Instructions. Mode d’emploi. Instrucciones de manejo. Tremo Sound. 233–31673.002 ■ 1 BA31673_002Tremo_GB_5 1 31.08.2004, 13:18 Uhr
  • Страница 2 из 19
    Contents Índice Contenu Tremo amplifier 3 Amplificateur Tremo 21 Amplificador Tremo 39 About this speaker system Scope of delivery Available accessories 4 A propos du système Contenu de la livraison Accessoires disponibles 22 Acerca de este sistema de altavoces Volumen de suministro Accesorios
  • Страница 3 из 19
    Tremo amplifier ON Power OUT ON/OFF switch R Surr. OFF L Terminals for connecting satellite speakers R Front C Bass Intensity L Controller for bass intensity Min. Switch for center signal Center to Sat TV Slave Cubic sockets for Loewe equipment Line IN Right Subw. Left Surr. Max. Phase 0 180 Phase
  • Страница 4 из 19
    About this speaker system Congratulations on your purchase of this Loewe product. The Tremo speaker system consists of a subwoofer with amplifier unit and five satellite speakers, all of the finest quality. The natural material ceramic forms the basis for the subwoofer housing. It is made into the
  • Страница 5 из 19
    Installing the subwoofer and satellite speakers The satellite speakers should all be positioned at ear height, i.e. about 1 meter above the floor. Use the available stands or wall holders or place the speakers at the appropriate height on pieces of furniture or on shelves. The speakers and the TV
  • Страница 6 из 19
    Connection ... to the Loewe TV set with Dolby Digital Module (MediaPlus Q2500, Q2550) Pull off the subwoofer cover to the back. Open the cable clip. You will use this later to bundle the cables. Connect the outputs of the Dolby Digital Decoder on the TV set with the audio inputs on the subwoofer.
  • Страница 7 из 19
    Connection ... to Articos 55 with Dolby Digital Module (from software version 6.20) See the instructions for laying the cables on page 6. Note: If the Tremo system is not selectable on your set in the TV menu - Sound - under ”Sound via”, have your dealer do a software update. The ”Center”
  • Страница 8 из 19
    Connection ... to the Master Unit with Dolby Digital Module with Spheros 42 HD and Spheros 37 (from software version 6.14) See the instructions for laying the cables on page 6. Note: If the Tremo system is not selectable on your set in the TV menu - Sound - under ”Sound via”, have your dealer do a
  • Страница 9 из 19
    Connection ... to TV sets with the signal box with builtin Dolby Digital Module See the instructions for laying the cables on page 6. The ”Center” connections do not necessarily have to be made because the center signal is always played over the TV speakers. How to connect the satellite speakers is
  • Страница 10 из 19
    Connection ... to Loewe DVD Preceiver Auro 8116 DT with Loewe TV set (from Loewe TV MediaPlus Q2500, software 6.x) If you use the Loewe DVD Preceiver in connection with a Loewe TV set, connect the Tremo speaker system to the audio outputs of the DVD Preceiver. See the instructions for laying the
  • Страница 11 из 19
    Connection to the Loewe DVD Preceiver Auro 8116 DT with Articos 55 (from Software 6.15), Master Unit in Spheros 42 HD and Spheros 37 (from Software 6.20) or with the signal box If you use the Loewe DVD Preceiver in connection with a Loewe TV set, connect the Tremo speaker system to the audio
  • Страница 12 из 19
    Connection ... to Loewe Certos with Loewe TV set (from Loewe TV MediaPlus Q2500, software 6.x) Connecting cable to Certos system Order no. 88947.001 If you use the Loewe Certos system with a Loewe TV set, connect the Tremo loudspeaker system to the audio outputs of the Certos system. See the
  • Страница 13 из 19
    Connection ... to Loewe Certos with Articos 55 (from Software 6.15), with Master Unit for Spheros 42 HD and Spheros 37 (from Software 6.20) or with the signal box. Connecting cable to the Certos system Order No. 88947.001 If you use the Loewe Certos system with a Loewe TV with signal box or Articos
  • Страница 14 из 19
    Connection ... Connecting the satellite speakers to the subwoofer 1. Remove the cover over the speaker connections from the satellite speakers. Cover on the subwoofer Replace the cover after making the following settings: The center speaker can be omitted with Loewe TV sets from chassis MediaPlus
  • Страница 15 из 19
    Mounting the satellite speaker on the S stand You can mount the Tremo satellite speaker on the S stand. See the installation instructions provided with the stand. You do not need the following parts: Flange (2) and the screws (B, C1 – C3). Proceed as follows: • Fix the conical base (included in the
  • Страница 16 из 19
    Start-up and operation Select the center signal on the subwoofer Use the ”Center to” switch to set whether the center signal is to be reproduced via the Loewe TV speakers or by a separately installed center satellite speaker. Switch pressed = center via TV set Switch not pressed = center via
  • Страница 17 из 19
    Technical data General Subwoofer transmission range Satellite transmission range Mains voltage Max. power consumption Nominal power consumption Power consumption on standby 40 Hz–150 Hz 150 Hz–20 kHz 220 – 240 Volt 250 Watt 50 Watt < 0.5 Watt Features Digital output stages Subwoofer channel
  • Страница 18 из 19
    18 BA31673_002Tremo_GB_5 18 31.08.2004, 13:18 Uhr
  • Страница 19 из 19