13
120-240V
50/60Hz
SERVICE
IR-
Link
SYSTEM
ANT-1
ANT-2
PIP
UHF/VHF
AUDIO
IN 2
Y
IN1
AUDIO IN1
L R
AV 2 ( RGB )
Center Sub
L R
SOURROUND
DVI-INPUT
D-SUB
DVI-OUTPUT
CONTROL
RC5/
RC6
VGA
DISPLAY
DIGITAL
L R
AUDIO IN 3
L R
AUDIO OUT
C
R
/P
R
C
B
/P
B
IN2
OUT
AV 1
ON
Line IN
Power OUT
OFF
Bass Intensity
Center to
System connector
230V~50/60Hz
Surr.
Front
Right
Surr.
Front
Subw. Left
Right Center Left
Slave
Master
R
R
L
C
L
Phase
Min.
Max.
TV
Sat
0
180
FM
Antenna
S-Link
TV EXT
Pre Out
Front Center Rear
Aux 2
In Out
Aux 1
In
System-Con.
R
L
CERTOS
Euro AV
Bassmodul
Link
DVB
In
D-Aux 3
In
Digital
Out
Digital
Out
D-Aux 4
In
LFE
230V / 50-60Hz
Signalbox
Connection
... to Loewe Certos with Articos 55 (from
Software 6.15), with Master Unit for
Spheros 42 HD and Spheros 37 (from
Software 6.20) or with the signal box.
Connecting cable to the Certos system
Order No. 88947.001
If you use the Loewe Certos system with a
Loewe TV with signal box or Articos 55, connect
the Tremo speaker system to the audio outputs
of the Certos system. See the instructions for
laying the cables on page 6.
With the connecting cable order no. 88947.001
connect the bass module link socket to the
Certos system with the cubic socket ”Master”
on the Tremo subwoofer.
If the TV speakers are used for center playback
connect one of the two AUDIO IN 3 inputs on
the signal box or Articos 55 to the Center con-
nection on the Certos system with a cinch
cable.
If, on the other hand, you want to use the exter-
nal Center speakers, do not make the connec-
tion between the Certos system and AUDIO IN
3 described above. In this case, connect the
Center connection of the Tremo bass module to
the center output of the Certos system (this
connection is shown by a dotted line in the
drawing). Set the ”Center to” switch to ”Sat”.
Connect the TV set (Euro AV socket 2 for signal
box or Euro AV socket 3 for Articos 55 and the
Master Unit for Spheros) to the Certos system
with the Euro AV cable.
Connect the signal box or the Articos 55 (SER-
VICE socket) to the TV-S-Link socket of the
Certos system with the L-Link cable (enclosed
with the Certos system). This ensures that the
Tremo speaker system is switched on for radio
or CD playback but the TV remains switched
off.
If the Master Unit/signal box or Articos 55 is
equipped with a DVB module, connect the digi-
tal output of the TV set to DIGITAL IN of the
Certos system with a cinch cable (if a DVB mod-
ule with Digital-OUT terminal is installed, use
the DIS connection). This ensures that the digital
audio signal is fed to the Certos system for
decoding.
How to connect the satellite speakers is de-
scribed on page 14.
Speaker settings for the Certos system:
Observe the settings for the speakers of the
Certos system (see operating manual of the
Certos system from page 25).
Set ”small” for front and surround speakers. If
the TV speakers are used as center speakers, set
”TV”, if you want to use the external speaker as
center, set ”small”.
For woofer select ”yes”.
Also level speakers and set listener/speaker
distances as described in the Certos operating
manual on page 27.
BA31673_002Tremo_GB_5
31.08.2004, 13:18 Uhr
13