11
120-240V
50/60Hz
SERVICE
IR-
Link
SYSTEM
ANT-1
ANT-2
PIP
UHF/VHF
AUDIO
IN 2
Y
IN1
AUDIO IN1
L R
AV 2 ( RGB )
Center Sub
L R
SOURROUND
DVI-INPUT
D-SUB
DVI-OUTPUT
CONTROL
RC5/
RC6
VGA
DISPLAY
DIGITAL
L R
AUDIO IN 3
L R
AUDIO OUT
C
R
/P
R
C
B
/P
B
IN2
OUT
AV 1
ON
Line IN
Power OUT
OFF
Bass Intensity
Center to
System connector
230V~50/60Hz
Surr.
Front
Right
Surr.
Front
Subw. Left
Right Center Left
Slave
Master
R
R
L
C
L
Phase
Min.
Max.
TV
Sat
0
180
PREOUT
FR
FL
SL SR
SUB
C
TO TV
TV
EXT
12V/15mA
L-Link
AM GND
FM (75
Ω
)
L
L
R
R
AUX1 IN
DIGITAL
IN
DIGITAL
OUT
AUX OUT
AUX 2
Signalbox
Connection
to the Loewe DVD Preceiver Auro 8116 DT
with Articos 55 (from Software 6.15), Master
Unit in Spheros 42 HD and Spheros 37 (from
Software 6.20) or with the signal box
If you use the Loewe DVD Preceiver in connec-
tion with a Loewe TV set, connect the Tremo
speaker system to the audio outputs of the DVD
preceiver. See the instructions for laying cables
on page 6.
Connect the cubic socket on the DVD Preceiver
to the ”Master” cubic socket on the Tremo
subwoofer. Use the cubic plug cable provided
with the DVD Preceiver Auro (2-wire cable).
Plug the white plug (without kink protection)
into the cubic socket on the subwoofer.
If the speakers of the Loewe TV set are used for
center playback, connect the cubic socket on
the TV set to the ”Slave” cubic socket on the
subwoofer with the cubic plug cable. Set the
”Center to” switch on the subwoofer to ”TV”.
If, on the other hand, you want to use the exter-
nal Center loudspeakers, do not connect the
Slave and the TV set.
Set the switch ”Center to” on the subwoofer to
”Sat”.
Connect the TV set (Euro AV socket 2 for signal
box or Euro AV socket 3 for Articos 55 and the
Master Unit for Spheros) to the DVD Preceiver
with the Euro AV cable.
Connect the TV set (Service socket) to the TV-L-
Link socket of the DVD Preceiver with the L-
Link cable (enclosed with the DVD Preceiver).
This ensures that the Tremo speaker system is
switched on for radio or CD playback but the
TV stays switched off.
Connect the digital output of the TV set to the
DIGITAL IN input of the Auro system by a cinch
cable (if a DVB module with Digital-OUT termi-
nal is installed, use the DIS connection). This
ensures that the digital audio signal is fed to
the DVD Preceiver for decoding.
How to connect the satellite speakers is de-
scribed on page 14.
Settings on the DVD Preceiver Auro
8116DT
In the DVD menu under Settings select the
”Tremo” speaker system, set the listener/
speaker distances and level the speakers. Also
see the DVD Preceiver manual (page 12 and
13).
BA31673_002Tremo_GB_5
31.08.2004, 13:18 Uhr
11