Инструкция для Loewe Tremo

(скачивание инструкции бесплатно)
Формат файла: PDF
Доступность: Бесплатно как и все руководства на сайте. Без регистрации и SMS.
Дополнительно: Чтение инструкции онлайн
background image

12

Connection

... to Loewe Certos with Loewe TV set (from
Loewe TV MediaPlus Q2500, software 6.x)
Connecting cable to Certos system
Order no. 88947.001

If you use the Loewe Certos system with a Loewe
TV set, connect the Tremo loudspeaker system to
the audio outputs of the Certos system. See the
instructions for laying the cables on page 6.

Connect the bass module left hand socket on the
Certos system to the cubic ”Master” socket on
the Tremo subwoofer using the connecting cable
order no. 88947.001.
If the Loewe TV speakers are used for center
reproduction, connect the cubic socket on the TV
with the ”Slave” cubic socket on the subwoofer
using the cubic plug cable. Set the ”Center to”
switch on the subwoofer to ”TV”.
If, on the other hand, you want to use the exter-
nal center loudspeaker, do not connect the
”Slave” to the TV.
Set the ”Center to” switch on the subwoofer to
”Sat”.

Connect the TV set (Euro AV socket 3) to the
Certos system with the Euro AV cable.

Connect the TV (SERVICE socket) to the TV-S-Link
socket of the Certos system with the L-Link cable
(provided with the Certos system).
This ensures that the Tremo speaker system is
switched on but the TV stays switched off in the
case of radio or CD playback from the Certos
system.

If the TV set is equipped with a DVB-Module
with Digital OUT terminal and/or the DIS-Mod-
ule, connect the digital output of the TV set to
DIGITAL IN of the Certos system by a cinch cable
(if a DVB module with Digital-OUT terminal and
a DIS module is available, use the DIS connec-
tion). This ensures that the digital audio signal is
fed to the DVD Preceiver for decoding.

How to connect the satellite speakers is de-
scribed on page 14.

Speaker settings for the Certos system:

Observe the settings for the Certos system
speakers (see operating manual of the Certos
system from page 25).
Set ”small” for front, surround and center speak-
ers.
Select ”yes” for woofer.
Adjust the speakers (level) and also set the lis-
tener/speaker distances as described on page 27
of the Certos operating manual.

ON

Line IN

Power OUT

OFF

Bass Intensity

Center to

System connector

230V~50/60Hz

Surr.

Front

Right

Surr.

Front

Subw. Left

Right Center Left

Slave

Master

R

R

L

C

L

Phase

Min.

Max.

TV

Sat

0

180

FM

Antenna 

S-Link

TV           EXT

Pre Out

Front   Center   Rear

Aux 2

In         Out

Aux 1

In

System-Con.

R

L

CERTOS

Euro AV

Bassmodul

Link

DVB

In

D-Aux 3

In

Digital

Out

Digital

Out

D-Aux 4

In

LFE

230V / 50-60Hz

AV2/RGB

AV3

AV1

SAT

RC5/RC6

SAT A/D

AUDIO IN

SERVICE

AUDIO       OUT

VHF/UHF

R

IR

L

SUBWOOFER
STAND

VGA

CTRL

DIG OUT

DIG IN

1

2

BA31673_002Tremo_GB_5

31.08.2004, 13:18 Uhr

12

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Оглавление инструкции
  • Страница 1 из 19
    Operating Instructions. Mode d’emploi. Instrucciones de manejo. Tremo Sound. 233–31673.002 ■ 1 BA31673_002Tremo_GB_5 1 31.08.2004, 13:18 Uhr
  • Страница 2 из 19
    Contents Índice Contenu Tremo amplifier 3 Amplificateur Tremo 21 Amplificador Tremo 39 About this speaker system Scope of delivery Available accessories 4 A propos du système Contenu de la livraison Accessoires disponibles 22 Acerca de este sistema de altavoces Volumen de suministro Accesorios
  • Страница 3 из 19
    Tremo amplifier ON Power OUT ON/OFF switch R Surr. OFF L Terminals for connecting satellite speakers R Front C Bass Intensity L Controller for bass intensity Min. Switch for center signal Center to Sat TV Slave Cubic sockets for Loewe equipment Line IN Right Subw. Left Surr. Max. Phase 0 180 Phase
  • Страница 4 из 19
    About this speaker system Congratulations on your purchase of this Loewe product. The Tremo speaker system consists of a subwoofer with amplifier unit and five satellite speakers, all of the finest quality. The natural material ceramic forms the basis for the subwoofer housing. It is made into the
  • Страница 5 из 19
    Installing the subwoofer and satellite speakers The satellite speakers should all be positioned at ear height, i.e. about 1 meter above the floor. Use the available stands or wall holders or place the speakers at the appropriate height on pieces of furniture or on shelves. The speakers and the TV
  • Страница 6 из 19
    Connection ... to the Loewe TV set with Dolby Digital Module (MediaPlus Q2500, Q2550) Pull off the subwoofer cover to the back. Open the cable clip. You will use this later to bundle the cables. Connect the outputs of the Dolby Digital Decoder on the TV set with the audio inputs on the subwoofer.
  • Страница 7 из 19
    Connection ... to Articos 55 with Dolby Digital Module (from software version 6.20) See the instructions for laying the cables on page 6. Note: If the Tremo system is not selectable on your set in the TV menu - Sound - under ”Sound via”, have your dealer do a software update. The ”Center”
  • Страница 8 из 19
    Connection ... to the Master Unit with Dolby Digital Module with Spheros 42 HD and Spheros 37 (from software version 6.14) See the instructions for laying the cables on page 6. Note: If the Tremo system is not selectable on your set in the TV menu - Sound - under ”Sound via”, have your dealer do a
  • Страница 9 из 19
    Connection ... to TV sets with the signal box with builtin Dolby Digital Module See the instructions for laying the cables on page 6. The ”Center” connections do not necessarily have to be made because the center signal is always played over the TV speakers. How to connect the satellite speakers is
  • Страница 10 из 19
    Connection ... to Loewe DVD Preceiver Auro 8116 DT with Loewe TV set (from Loewe TV MediaPlus Q2500, software 6.x) If you use the Loewe DVD Preceiver in connection with a Loewe TV set, connect the Tremo speaker system to the audio outputs of the DVD Preceiver. See the instructions for laying the
  • Страница 11 из 19
    Connection to the Loewe DVD Preceiver Auro 8116 DT with Articos 55 (from Software 6.15), Master Unit in Spheros 42 HD and Spheros 37 (from Software 6.20) or with the signal box If you use the Loewe DVD Preceiver in connection with a Loewe TV set, connect the Tremo speaker system to the audio
  • Страница 12 из 19
    Connection ... to Loewe Certos with Loewe TV set (from Loewe TV MediaPlus Q2500, software 6.x) Connecting cable to Certos system Order no. 88947.001 If you use the Loewe Certos system with a Loewe TV set, connect the Tremo loudspeaker system to the audio outputs of the Certos system. See the
  • Страница 13 из 19
    Connection ... to Loewe Certos with Articos 55 (from Software 6.15), with Master Unit for Spheros 42 HD and Spheros 37 (from Software 6.20) or with the signal box. Connecting cable to the Certos system Order No. 88947.001 If you use the Loewe Certos system with a Loewe TV with signal box or Articos
  • Страница 14 из 19
    Connection ... Connecting the satellite speakers to the subwoofer 1. Remove the cover over the speaker connections from the satellite speakers. Cover on the subwoofer Replace the cover after making the following settings: The center speaker can be omitted with Loewe TV sets from chassis MediaPlus
  • Страница 15 из 19
    Mounting the satellite speaker on the S stand You can mount the Tremo satellite speaker on the S stand. See the installation instructions provided with the stand. You do not need the following parts: Flange (2) and the screws (B, C1 – C3). Proceed as follows: • Fix the conical base (included in the
  • Страница 16 из 19
    Start-up and operation Select the center signal on the subwoofer Use the ”Center to” switch to set whether the center signal is to be reproduced via the Loewe TV speakers or by a separately installed center satellite speaker. Switch pressed = center via TV set Switch not pressed = center via
  • Страница 17 из 19
    Technical data General Subwoofer transmission range Satellite transmission range Mains voltage Max. power consumption Nominal power consumption Power consumption on standby 40 Hz–150 Hz 150 Hz–20 kHz 220 – 240 Volt 250 Watt 50 Watt < 0.5 Watt Features Digital output stages Subwoofer channel
  • Страница 18 из 19
    18 BA31673_002Tremo_GB_5 18 31.08.2004, 13:18 Uhr
  • Страница 19 из 19