13

Daily operation

Direct recording

You can record the TV station that you are
watching on the TV set directly, without having
to select the station on the video recorder. For
stations received via antenna or cable, the
video recorder detects the station that is to be
recorded and uses its own receiver.
Pre-conditions:
• The TV set is equipped with Digital Link Plus

(or is a similar system from another
manufacturer).

• The TV set and video recorder must be

connected by a Euro AV cable.

• A cassette without record protection is

inserted into the video recorder
compartment.

• The video recorder must be in standby mode

(if the unit is switched on, it will use the
station currently selected on the video
recorder)

Start recording

The video recorder records the station selected
on the TV set. You can now switch off the TV
set, or you can change to another station or
switch to playing a second video recorder or
DVD player.
If you are watching a satellite station on a TV
set with Digital Link Plus or a comparable
system, then picture and sound are transferred
by the Euro AV cable. The video recorder sets
the recording source as AV 1. In this case, you
can switch the TV set to standby (on Loewe TV
sets, the red and green LEDs will then come
on). You can only switch to other satellite
stations if your TV set has two satellite tuners.
You can, however switch to stations that can be
received by antenna or cable.

+

Control video recorder with
the video control bar of the
Loewe TV set

Loewe TV sets have a video control bar that can
be called up by the 

V=

 key

.

 The video control bar

allows you to control the main functions of the
video recorder.
To do this Digital Link on the video recorder must
be switched on.

Switch on Digital Link on the video recorder

Keep pause key

 pressed down,

then press P+

Display on video recorder.

For further information on this setting, see Page
24.

Operate with the video control bar

Call up video control bar on the
Loewe TV set

If several AV sets are connected:
select set

Select function

Execute function

Functions of the video control bar:

O

VCR on/standby

Stop

Rewind

Fast forward

Play

Record

Still frame/Pause          

AUX

switch VCR to
AV1

P+

+

LINK

V=

OK

Recording from a video
recorder/Camcorder

To do this, use the Euro AV socket 2 or the Cinch
sockets on the front of the video recorder and
select the socket.

Select socket(s), press repeatedly

Display on video recorder
AV2 for Euro AV socket 2
AVS for Cinch sockets at the
front

Start recording

and at the  same time start play on the second
video recorder or camcorder.

Record picture from VCR
tuner, sound from HiFi

If the sound for the TV transmission is broadcast
by radio, you can record the picture from the
receiving unit of the video recorder and the
sound from the HiFi unit. For this you must feed
the sound signal of your HiFi unit to the Cinch
sockets on the front of the video recorder.

Select the television station on
the video recorder.
Set the appropriate station on
the HiFi unit.

Select socket; press repeatedly
until SC is displayed. The number
after this indicates the memory
location of the selected station.

Start recording

AV2

AVS

+

SC--02

+

AUX

VCR

STOP

▼ ▼

▼

▼

▼

●

❚❚

■

O K

M

i

E

Menu

Info

End

BA_VCR_31251_020EU_GB2

17.04.2003, 15:29 Uhr

13