[Страница 24/28] - Инструкция: видеомагнитофон Loewe ViewVision 8106

Инструкция для Loewe ViewVision 8106

(скачивание инструкции бесплатно)

Формат файла: PDF

Доступность: Бесплатно как и все руководства на сайте. Без регистрации и SMS.

Дополнительно: Чтение инструкции онлайн

Settings for the video recorder

There are several ways of selecting the video
recorder to be used:

Via the video operating bar of the Loewe
TV set

Use the

key to call up the video control bar,

and select with

keys

directly the set to be

operated. Using the

key, close the video

control bar and operate the selected video
recorder via the TV set.

Via the AV selection of the Loewe TV set

Call up the AV selection with the 0 numerical
key.
Using the

keys select the socket, which

the video recorder to be used is connected to.
You can now operate the selected video
recorder via the TV set.

Via the station list of the TV set

Using the

key call up the station list of the

TV set.
Using the arrow keys

hg< >

< >

highlight the

AV socket (AV1 or AV2) to which the video
recorder to be operated is connected (if a DVD
player is also connected, AV3) and press

switch to the socket.
You can now operate the selected video
recorder via the TV set.

Switch on Digital Link on
the video recorder

Switch on Digital Link if you have connected
the video recorder to a Loewe TV set via a Euro
AV cable. The advantages are:
• the video recorder can be installed in a

concealed location;

• the video control bar of the Loewe TV can

be used;

• Timer recordings can be controlled from the

TV set (including Loewe TV sets without
Digital Link Plus. e.g. for recording from an
integrated satellite tuner.

To switch Digital Link on the video recorder on
and off:

Hold down the Pause key

then press

P+

Display on video recorder
(Digital Link switched on).

Display on video recorder
(Operation via video recorder
switched on).

If the child lock is activated, Digital Link cannot
be switched on.

For timer recordings controlled from the Loewe
TV set the recording start time is established by
the TV set, and picture and sound are
transferred via the Euro AV cable to the video
recorder.
With Digital Link switched on point the VCR
remote control at the Loewe TV set. The
commands will be transferred to the video
recorder via the Euro AV cable. If two video
recorders are connected, you must select the
one you want to use before operating the video
recorder.

P+

LINK

FRONT

Repeat first installation

It is worth repeating the first installation
procedure if you have moved house or the
video recorder is to be operated in conjunction
with another TV set.

To start the first installation:
Switch the video recorder to standby.

Keep the „on“ key

on the

video recorder pressed down,
and press the play key on the
remote-control

Display on video recorder
(1.Inst = First Installation)

The video recorder switches on. The language
selection menu appears.
Select ”your” language and continue with

Enter the location of set if necessary. Confirm
again with

Then carry out the station search procedure, as
necessary. Further information can be found on
Page 8.

1.Inst

BA_VCR_31251_020EU_GB2

17.04.2003, 15:30 Uhr

Оглавление инструкции

Страница 1 из 29
Operating instructions. Video. ViewVision 8106 H 233–31251.020 ■ 1 BA_VCR_31251_020EU_GB2 1 17.04.2003, 15:29 Uhr
Страница 2 из 29
Contents Setting up 6 Recording a TV broadcast 12 Insert cassette without record protection 12 Select station 12 ...with the arrow keys of the remote control 12 ... via the station list 12 ... on video recorder 12 Select recording speed 12 Start recording 12 ... using the remote control 12 ... on
Страница 3 из 29
Remote control – VCR functions During play: select sound During stop: station language selection Indicator: TV operation Indicator: DVD operation During stop: select picture and sound source DVD Select set to be operated TV/DVD/VCR Display/close ShowView-Timer Menu Control 201 VTR TV Switch on/off
Страница 4 из 29
Operation from video unit Switch on/off in standby mode Stop/eject cassette Cassette compartment Rewind Pause PLAY Fast forward 20:15 P– Video Sound input REC P+ Station –/+ Open flap here (shown opened) RECORD Connections to rear panel ENTREE ANTENNE EURO AV2 DECODER AUDIO SORTIE OUT G L EURO AV1
Страница 5 из 29
Welcome Thank you for choosing a Loewe product. We are happy to welcome you as a customer. At Loewe we combine the highest standards of technology, design and user friendliness. This applies equally to videos, TVs, HiFis and accessories. Neither technology nor design is an end in itself, but both
Страница 6 из 29
First installation For your safety Setting up Cleaning For your safety and to avoid damage to the video recorder, remote control and cassette, ensure that you protect the equipment against: • Damp and moisture • Knocks and mechanical stresses • Magnetic and electrical fields • Cold, heat, direct
Страница 7 из 29
First installation Batteries – remote control Connection To insert or change the batteries press on the arrow. Slide the battery compartment cover downwards and remove it. Insert Alkali Mangan LR 03 (AAA) batteries and ensure that the + and – ends are connected correctly. Antenna Remove the antenna
Страница 8 из 29
First installation Switching on the video recorder for the first time Switch on using the blue O key on the remote control, or the O key on the video recorder. The first installation starts. 1.Inst Display on video recorder Picture and sound from the video recorder on a TV set with a Euro AV
Страница 9 из 29
Daily operation Switch on/switch off video recorder Use the O key on the remote control or on the video recorder to switch on the unit. The display on the video recorder shows the last station viewed. If you press the O key again, the video recorder switches to standby. The display on the video
Страница 10 из 29
Daily operation Stop playing. Play cassette If you have a pre-recorded cassette, you can now play it. If you don’t have a pre-recorded cassette refer to the ”recording” section. Insert a cassette. VHS If the record protection tab on the cassette has been broken off, play starts immediately, even if
Страница 11 из 29
Daily operation Pause (still frame)/frame-by-frame advance During play, you can switch to still frame. The picture is subject to interference from the system and has no sound. To prevent damage to the video heads and the tape, the unit switches back to play after five minutes. Picture search During
Страница 12 из 29
Daily operation Highlight station Recording a TV broadcast Insert cassette without record protection Insert a cassette without record protection (tab still in place) into the cassette compartment. Select station If you want to start the recording manually then you must first select the television
Страница 13 из 29
Daily operation + Start recording Select socket(s), press repeatedly AV2 AVS Display on video recorder AV2 for Euro AV socket 2 AVS for Cinch sockets at the front Loewe TV sets have a video control bar that can be called up by the V= key. The video control bar allows you to control the main
Страница 14 из 29
Daily operation Timer functions - Overview If you want to make recordings during your absence, your video recorder and the Loewe TV set offer easy programming facilities. If you have a TV magazine with ShowView numbers, use the ShowView Timer of the video recorder. You can programme single,
Страница 15 из 29
Daily operation ShowView-Timer SV Call up ShowView menu using the numerical keys on the remote control, enter the number shown in the TV magazine. Do not enter the hyphens, they are only used to make them easier to read. If you programme several recordings ensure that you do not select several
Страница 16 из 29
Daily operation Programme Timer on a Loewe TV set 16 If you have connected a video recorder to a Loewe TV set with a MediaPlus Q2500 chassis, you can programme Timer recordings on the TV set as described here. A cassette without recording protection must be inserted in the video recorder, otherwise
Страница 17 из 29
Settings for the video recorder Language Special information Time and date You may remember that you selected ”your” menu language when first installing the video recorder. If the language has been inadvertently changed by you or by another user, you must re-select the language. To make it easier
Страница 18 из 29
Settings for the video recorder TV stations with Digital Link Plus Search for TV stations on video recorder If you have connected your video recorder to a TV set with Digital Link Plus or a comparable system from another manufacturer (e.g.. EasyLink, Mega Logic, Project 50), the station list will
Страница 19 из 29
Settings for the video recorder Sort/delete As mentioned in the introduction to this section, you can only sort and delete stations on the video recorder, if no Digital Link Plus TV set or TV set with a comparable system from another manufacturer is connected. M Call up VCR menu Highlight
Страница 20 из 29
Settings for video recorder Download stations from the TV If you have made changes to antenna or cable (not satellite) stations on the attached TV set, the new station data must be transferred to the video recorder (for TV sets with Digital Link Plus or comparable systems from other manufacturers).
Страница 21 из 29
Settings for the video recorder Switch on/off status display You can switch on/off the display of the tape running function, the counter, the remaining tape, etc. If the status display is switched off, it does not appear when the tape run functions are operated. It can be displayed as before by
Страница 22 из 29
Settings for the video recorder Child lock In the ”Settings” menu, you can activate the child lock. With the child lock activated and the video recorder set to standby, the video recorder cannot be used. However, the remote control can still be used for operation. You must therefore store the
Страница 23 из 29
Settings for the video recorder Decoder on the video recorder AV socket 2 A pay decoder is registered in the Loewe TV set, as described on page 7. If you connect a pay TV decoder to the Euro AV socket 2 (upper socket) of the VCR, mark this with ‘Yes’ in the settings for the menu item ”Decoder at
Страница 24 из 29
Settings for the video recorder Switch on Digital Link on the video recorder Switch on Digital Link if you have connected the video recorder to a Loewe TV set via a Euro AV cable. The advantages are: • the video recorder can be installed in a concealed location; • the video control bar of the Loewe
Страница 25 из 29
Operating other Loewe equipment with the VCR remote-control The video recorder remote control can be switched to operate Loewe TV sets or Loewe DVD players. These sets can be operated directly. Select the equipment to be operated: For TV set The TV indicator on the remote control lights up Press
Страница 26 из 29
What to do, if ... Problem Possible causes Help Digital Link Plus does not function a) The video recorder has not been registered as a Digital Link Plus set b) The video recorder has been connected to the wrong AV socket on the TV set c) The Euro AV is not fully connected (Pin 10 not assigned) a)
Страница 27 из 29
Technical data ViewVision VV8106H Dimensions in cm Weight Operating voltage Power consumption, operation, Standby Power save standby Video system Video colour system NTSC play Sound systems Internal transmitter Video heads Audio heads Audio head Tape speed Tracking Timer Picture format switching
Страница 28 из 29
Service addresses Australia International Dynamics Australasia Pty Ltd. 129 Palmer Street AUS - Richmond, Victoria 3121 Tel. 03–94 29 08 22 Fax 03–94 29 08 33 Austria Robert Bosch AG Postfach 146 A–1011 Wien Tel 01–79 72 24 500 Fax 01–79 72 24 599 Benelux Loewe Opta Benelux NV/SA Uilenbaan 84
Страница 29 из 29

Инструкция для Loewe ViewVision 8106

Инструкции и руководства похожие на Loewe ViewVision 8106

Другие инструкции и руководства из категории видеомагнитофон