27

After the login procedure, the following operations are 
available to control the system.
The operation begins with monitor selection. Then, the 
image of selected camera appears on the active moni-
tor.

■

Monitor Selection

 1.  Select the desired monitor number by pressing the 

numeric buttons. The entered number will appear 
on the LCD.

 2.  Press the MON (ESC) button. 
    When the selected monitor number is correct, <" is 

displayed.

Note:

 •  To select the next or previous monitor number,

press the + or – button.

■

Camera Selection

 1.  Select the desired camera number by pressing the 

numeric buttons. The entered number will appear 
on the LCD.

 2.  Press the CAM (SET) button. 
    When the selected camera number is correct, >" is 

displayed.

Note:

 •  To select the next or previous camera number,

press the + or – button.

 MON  123       CAM

      Unit:01

 MON            CAM

0123<Unit:01

 MON 512      CAM

0123<Unit:01

 MON            CAM

0123 Unit:01  >00512

Monitor Selection and Camera Selection

■

Monitor Lock

Monitor lock is the function to retain other operators'
control of a monitor even after that operator has 
selected another monitor.

Note:

 •  This function will prevent operators with a lower

priority from gaining control of a monitor. However, 
operators with a higher priority can gain the control 
of monitor.

 1.  Select a desired monitor. (Refer to Monitor 

Selection.)

 2.  Press the MON LOCK/LOGOUT button. The moni-

tor lock mode is activated, the monitor number 
with "L" sign is displayed on the active monitor, 
and "L" will appear beside "MON" on the LCD.

Note:

 •  Every time you press the MON LOCK/LOGOUT

button, the monitor lock mode will be activated or 
deactivated.

LMON            CAM

0123 Unit:01   00512