31

■

Defroster Control

The following procedure is available when a selected 
camera (housing) is equipped with a defroster.

 1.  Select the desired monitor and camera. (Refer to 

p. 27 Monitor Selection and Camera Selection.)

 2.  Pressing the DEF ON/OFF button.
    The defroster will be activated.

 3.  To deactivate the defroster, press the DEF ON/OFF 

button while holding down the SHIFT button.

Note:

 •  The defroster will be automatically deactivated

when the temperature reaches the specified 
degrees.

■

Auxiliary Control

You can control one or two auxiliary control devices. 
The following procedure is available when an auxiliary 
control device, such as Receiver WV-RC150, is con-
nected to a system unit.

●

 Operating Procedure

 1.  Select the desired monitor and camera. (Refer to 

p. 27 Monitor Selection and Camera Selection.)

 2.  Press the AUX 1 ON/OFF or AUX 2 ON/OFF but-

ton.

    The auxiliary control device, associated by the 

installation wiring, will be activated.

 3.  To quit the auxiliary control, press the AUX 1 ON/

OFF or AUX 2 ON/OFF button while holding down 
the SHIFT button.

 MON Def On     CAM

0123 Unit:01   00512

 MON Def Off    CAM

0123 Unit:01   00512

 MON Aux1 On    CAM

0123 Unit:01   00512

 MON Aux2 On    CAM

0123 Unit:01   00512

 MON Aux1 Off   CAM

0123 Unit:01   00512

 MON Aux2 Off   CAM

0123 Unit:01   00512