37

Alarm Control

■

Alarm Selection

To control alarm behaviors, you need to select a 
desired alarm number.

 1.  Select a desired alarm number by pressing the 

numeric buttons. 

 2.  Press the ALARM/ALM SUSPEND button. 
    The current status of selected alarm will be dis-

played on the LCD.

Armed: The system is armed for alarm response.
Active: Alarm has been triggered and activated 

assigned alarm response.

Ack: Alarm is acknowledged and an operator can 

control the alarm action.

Reset: Activated alarm is reset, but the alarm 

device is still active.

Disarm: The system is disarmed for alarm 

response.

Clear: Auto arming is not set in the admin console.

3.  To select the next alarm number, press the + but-

ton.

   To select the previous alarm number, press the –

button.

 MON 1          CAM

0123 Unit:01   00512

 MON Alarm00001 CAM

0123  Armed    00512

■

Alarm Arming Control

 1.  Select a desired alarm. (Refer to Alarm Selection.)

 2.  Every time you press the ALARM/ALM SUSPEND 

button, the selected alarm will be armed or dis-
armed. When an alarm is disarmed, the LCD dis-
play will become as follows.

 3.  To exit the alarm mode, press the CLEAR button. 

The LCD display will become as follows.

To arm or disarm all alarms
Every time you press the ALARM/ALM SUSPEND but-
ton while holding down the SHIFT button, all alarms 
will be armed or disarmed.

Note:

 •  To arm or disarm an alarm, activate Allow Disarm

for the alarm. (Refer to the Admin Console User's
Guide for details.)

 MON Alarm00001 CAM

0123  Disarm   00512

 MON Alarm Exit CAM

0123 Unit:01   00512

 MON            CAM

0123 ALL Arm   00512

 MON            CAM

0123 ALLDisarm 00512