124
3
Ta
kin
g
Pictur
es
You can change the captured area by
turning the zoom lever to the left or
right.
Right (
*
) Enlarges the subject.
Left (
/
) Widens the area that
is captured by the
camera.
4
Press the shutter release button fully.
Recording starts. You can continue recording until the built-in memory
or the SD Memory Card is full, or the size of the recorded movie
reaches 2 GB.
5
Press the shutter release button fully.
Recording stops.
Playing Back a Movie
1
p.133
• The flash does not discharge in
C
mode.
• The focus mode can be changed before recording starts.
• When the focus mode is set to
\
(Manual Focus), you can adjust the
focus before recording starts.
• You can use the optical zoom only before recording, while the digital
zoom is available both before and during recording.
• Even if you change the display mode by pressing the
4
/
W
button while recording a movie, the histogram cannot be displayed on
the monitor.
• When the shooting mode is set to
C
, the Face Detection function is
automatically activated. You can switch to Smile Capture or Face
Detection Off by pressing the
I
button before starting recording a
movie (p.70). When the Smile Capture function is selected, movie
recording starts automatically when the camera detects the subject’s
smile. However, depending on the condition of the detected faces,
movie recording may not start automatically because the Smile
Capture function may not work. If this happens, press the shutter
release button to start movie recording.
• You can record a movie using the remote control unit (optional) (p.93).
e_kb494.book Page 124 Wednesday, February 3, 2010 5:12 PM