![background image](/i/president/153206/president-mc-8000-dsc/h/president-mc-8000-dsc-012.png)
12
nications. Press
16/9/TRI
a third time to return to the channel selected prior to accessing
Channel 16/Channel 9 communications.
The display will indicate the selected channel.
To cancel Channel 16/Channel 9 communications:
• Press
16/9/TRI
until the previous channel setting appears.
- - or - -
• Press
CH
▲
▲
▲
▲
▲
,
CH
▼
▼
▼
▼
▼
or
STEP/SCAN
.
Triple Watch
Triple Watch monitors Channel 16, Channel 9, and the current Marine Channel.
To activate Triple Watch, press and hold
16/9/TRI
for 2 seconds.
TR I
appears on the LCD, indicating Triple Watch mode is in ef-
fect. If a signal is received on either Channel 16 or Channel 9,
the radio remains on that channel until the signal ends.
Press and hold
16/9/TRI
for 2 seconds to cancel the Triple Watch
mode.
Note:
While in Triple Watch mode, you can change the cur-
rently selected channel using CH
▲
▲
▲
▲
▲
or CH
▼
▼
▼
▼
▼
.
A momentary press of the 16/9/TRI button interrupts Triple Watch mode and re-
mains on channel 16, or on channel 9 if you press 16/9/TRI once more. To return to
the Triple Watch mode, simply press the button again.
Manual Tuning
To manually select a channel, press
CH
▲
▲
▲
▲
▲
or
CH
▼
▼
▼
▼
▼
or use the number key pad on the mic
and press
SELECT
. Communication channels are located on channel 01-28 and 60-88. Chan-
nel 70 is used for DSC only, user cannot select this channel.
Mem (Entering channel numbers into Memory Scan)
You can enter channels into Memory Scan for instant scanning at any time. When a channel
is selected for Memory Scan,
MEM
appears on the LCD display.
To enter a channel into Memory Scan, select the channel you
want to store by using
CH
▲
▲
▲
▲
▲
or
CH
▼
▼
▼
▼
▼
or use the number key pad
on the mic and press
SELECT
, and then press
MEM
. The chan-
nel is stored in Memory Scan and
MEM
appears on the LCD
display.
To cancel the channel in Memory, press
MEM
. The MEM icon
disappears.
Triple Watch Scan
To turn Triple Watch Scan On, press and hold
STEP/SCAN
for 2 seconds. While the current
channel is scanned, Channel 16 and Channel 9 are also scanned every 2 seconds. Then
TRI
appears.