![background image](/i/president/153206/president-mc-8000-dsc/h/president-mc-8000-dsc-030.png)
30
2-H. GROUP MMSI
1. Press
SELECT
at
SETUP
(To enter
SETUP
, see page 23).
2. Display
GROUP MMSI
using
CH
▲
▲
▲
▲
▲
or
CH
▼
▼
▼
▼
▼
.
3. Press
SELECT
. The group MMSI ID screen appears.
4. You can now enter the GROUP MMSI code. Use the number
key pad on the mic to display the number. The number will be
entered when
SELECT
or the different number key is pressed,
and the blinking digit moves to the right.
5. After the final digit is entered, a confirmation screen appears.
Press
SELECT
and the radio returns to the following screen.
2-I. USER MMSI
You will need to obtain a nine digit MMSI number and program it into the
MC-8000 DSC
. To
obtain an MMSI number, contact your authorized GPE dealer. This portion of the SETUP
menu will allow you to program an MMSI, (Maritime Mobile Service Identity) for sending and
receiving DSC calls.
To set USER MMSI code
1. Press
SELECT
knob at
SETUP
.
2. Press
CH
▼
▼
▼
▼
▼
eight times to select
USER MMSI
.
3. Press
SELECT
. The user MMSI ID screen appears.