![background image](/i/president/153206/president-mc-8000-dsc/h/president-mc-8000-dsc-037.png)
37
SYMPTOM
Won’t power On.
When the PTT is pressed -
Tx icon comes on and an-
other radio can hear a
“click” but no audio is heard.
While scanning, the radio
stops on a particular chan-
nel all of the time.
There is noise on the re-
ceiver that the squelch will
not eliminate.
CAUSE
No or low voltage.
Bad mic element.
A source of noise is nearby.
An external noise is being
generated by some device.
REMEDY
Check for proper voltage
getting to the set.
Send in for repair.
Eliminate the source of the
noise or delete the channel
from the scanner.
Either turn off the offending
device or contact that Mfg.
Troubleshooting
If the
MC-8000 DSC
does not perform to your expectations, try the suggestions listed below.
If you cannot get satisfactory results, call the GPE Technical Support
Warranty
This transceiver has a 3 years warranty for materials and workmanship in its country of
purchase against any manufacturing defect recognized by our technical department. It is
recommended to read carefully following conditions and to respect them in order not to loose
it.
• Any repair under warranty will be free of charge and the transport costs for sending back
will be on charge of our company.
• A proof of purchase must compulsorily be added to the transceiver in need of repair.
• Don’t install your transceiver without having read this instructions manual.
• Our technical department won’t send nor exchange any spare parts as part of warranty.
Are not covered
•
Immersion higher than : 30 minutes, 1 meter (IPX7)
•
Damages caused by accident , shock , inadequate packing or the use of accessories that
are not in conformity.
•
Interventions that modified the conformity features, repairs or modifications done by third
parties which are not agreed by our company.
•
Any opening of the housing cancels the warranty.•
Any opening of the housing cancels
the warranty.