![background image](/i/president/153206/president-mc-8000-dsc/h/president-mc-8000-dsc-031.png)
31
4. You can now enter the USER MMSI code. Use the number
key pad on the mic to display the number. The number will be
entered when
SELECT
is pressed, and the blinking moves to
the right.
5. After the final digit is entered, press and hold
SELECT
. The
radio returns to
USER MMSI
screen.
Note:
You can only program your radio once with an MMSI number. After that, send
your radio to GPE for factory service.
2-J. ATIS ID
ATIS is the automatic transmitter identification system. The ATIS ID is composed by number
of 10 digits, and it is already registered to your radio. The first digit is pre-selected to “9”, but
it doesn’t appear on the display. From 2
nd
to last digits are displayed.
To confirm the ATIS ID
1. Press
SELECT
knob at
SETUP
.
2. Press
CH
▼
▼
▼
▼
▼
nine times to select ATIS ID.
3. Press
SELECT.
The ATIS ID number appears.
If it’s necessary to change the ATIS ID, the user should send back to GPE for reprogramming.