![background image](/i/yamaha/162252/yamaha-vmx12h-1995/h/yamaha-vmx12h-1995-131.png)
ENGINE REMOVAL
SERVO MOTOR
1. Remove:
*Screws (servo motor bracket)
*Servomotor
*Servo motor coupler
2.
Disconnect:
ENGINE REMOVAL
1.
Place
a
suitable stand under the engine.
2.
Remove:
*Bolt (engine)
*Bolts (down tube)
*Down tube frame (right)
3.
Remove:
*Engine assembly
from right side.
NOTE:
Remove the rear cylinder head cover if diffi-
culties are encountered with any of the previous
steps.
V-BOOST
1. Remove:
assembly
NOTE:
Working in a crisscross pattern, loosen the bolts
1/4
turn each. Remove them after all are
loosened.
3-7