![background image](/i/yamaha/162252/yamaha-vmx12h-1995/h/yamaha-vmx12h-1995-073.png)
IMPORT
ANT INFORMATION
IMPORTANT INFORMATION
\
BEARINGS AND OIL SEALS
1.
Install the
and oil
with their manufacturer's
numbers
facing outward. (In other words, the
stamped letters must be on the side exposed
to view.) When installing oil
apply a
light coating of light-weight lithium base
grease to the
seal
Oil
the bearings
I
beral when installing.
ALL REPLACEMENT PARTS
1.
We recommend to use Yamaha genuine
parts for all replacements. Use oil and/or
grease recommended by Yamaha for assem-
bly and adjustment.
GASKETS, OIL SEALS, AND O-RINGS
1.
All gaskets, seals, and O-rings should be
replaced when an engine is overhauled. All
gasket surfaces, oil seal lips, and O-rings
must be cleaned.
2.
Properly oil
all mating parts and bearings
during reassembly. Apply grease to the
oil
seal lips.
LOCK
COTTER PINS
1.
All lock
and cotter pins
must be replaced when they are removed.
Lock
should be bent along the bolt
or nut
after the bolt or nut has been
properly tightened.
Do
not use compressed air to spin the bearings
dry. This causes damage to the bearing surfaces.
1-2