![background image](/i/yamaha/162252/yamaha-vmx12h-1995/h/yamaha-vmx12h-1995-190.png)
ENGINE ASSEMBLY AND ADJUSTMENT
CLUTCH AND
OIL PUMP DRIVE GEAR
1.
Install:
pump drive gear
2.
Install:
Clutch housing
Thrust washer
Clutch boss
0
Lock washer (new)
(clutch boss)
3.
Tighten:
(clutch boss)
Use the Clutch Holder
to
hold the clutch boss.
Nut (Clutch Boss):
70 Nm (7.0
50
4.
Bend the lock washer tabs along the nut
flat.
Install:
rod
Friction plates
,
plates
NOTE:
Install the friction plates and clutch plates
alternately on the clutch boss, starting with
a
friction plate and ending with
a
friction plate.
By the following installation steps.
3-66