![background image](/i/zelmer/152828/zelmer-41z010-41z011/h/zelmer-41z010-41z011-036.png)
36
GW41-002_v01
to clean the housing. They may remove the graphic information symbols such as:
scales, marks, warning signs etc.
Plug the appliance only to a grounded AC electrical outlet with the voltage
–
corresponding to the voltage indicated on the rating plate.
Do not place empty containers and dishes on the appliance.
–
Never use the electric stove to heat rooms or to heat harmful or volatile etc.
–
liquids or materials.
Never place the electric stove near open fire, heaters or other sources of heat.
–
Never use accessories which are not recommended by the manufacturer. They
–
may pose a threat to the user and pose a risk of damage to the appliance.
Never move the appliance by pulling on cord. Make sure the cord cannot be caught
–
in any way. Do not wind the cord around the appliance and do not bend it.
Never move the electric stove during cooking or when a hot pot is standing on it.
–
Make sure the appliance has cooled down completely before cleaning and
–
storing.
CAUTION: The temperature of the accessible surfaces may be very high when
the appliance is in use. Handle only the knobs during operation.
WARNING: Do not touch the accessible surfaces when the oven is
operating. Their temperature may be high – risk of burns.
Immediately unplug the appliance if a crack appears. Make sure it is controlled by
–
a qualified electrician.
Make sure the appliance never comes into contact with inflammable materials
–
such as curtains, clothes, etc. as it may constitute a cause of fire.
Be extremely careful, as oil and fat preparations may catch fire when
–
overheated.
While using the appliance under a cooker hood, make sure to observe the minimal
–
distance advised by the manufacturer. It is wise to even double the distance.
Make sure that the above instructions have been understood.
Technical parameters
The technical parameters are indicated on the rating label.
The electric stove is a I class appliance equipped with a cord having a grounding
wire with a grounding plug.
The appliance meets the requirements of the applicable norms.
The appliance is in conformity with the requirements of the directives:
Low voltage appliance (LVD) – 2006/95/EC.
–
Electromagnetic compatibility (EMC) – 2004/108/EC.
–
The appliance was marked by a CE sign on the rating label.