![background image](/i/zelmer/152828/zelmer-41z010-41z011/h/zelmer-41z010-41z011-037.png)
37
GW41-002_v01
Appliance features
1. Heating plates
2. Temperature adjustment knobs
3. Indicator lamps
How to use
1. Before plugging in the appliance make sure the knobs
(2)
are in the position
0
.
Before initial use set the knobs
(2)
at the maximum setting and leave the
appliance switched on for about 10 minutes Smoke will develop and odors may
be temporarily generated. Make sure the room is ventilated. After about 10
minutes switch off the heating plates
(1)
by turning the knobs
(2)
to the
0
position
and wait until they cool down completely.
2. Always use flat-bottomed saucepans which make good contact with the heating
plates.
The saucepan should not be smaller than the heating plate.
NOTE: Place the pan only with a clean and dry bottom on a clean and dry
heating plate.
3. Set the temperature of the selected heating plate or both plates using the knob
(2)
the indicator lamp
(3)
will come on. The power of the heating plate may be
gradually adjusted by turning the knob to the right or to the left.
Setting
0
– stove is switched off
Setting
1
– the stove is switched on (minimal temperature)
Setting
2
,
3
– medium temperature
Setting
4
– maximum temperature
After turning the temperature setting knob to “1, 2, 3, 4” positions, the pilot lights
are on.
When you turn the knob to position “1”, after the plate is heated in “2, 3, 4”
positions, the pilot light can be off, however the cooker is still in operation. In
such case keep all safety rules.
REMARK: In order to switch off the cooker, turn the knob into “0” position.