24

PC-005_v02

LOCK Function

The LOCK function enables you to lock all buttons except 

 and 

 to prevent children from accidentally switching 

on the appliance.

1

 Press 

 to lock the buttons „

” will be displayed on 

the time indicator.

2

 To unlock the buttons, press and hold 

.

If the appliance is switched off with LOCK function on, 

to switch it back on 

fi

 rst unlock the hob by pressing and 

holding 

, and then press 

 button.

Cleaning and Maintenance

Remember to clean the appliance on a regular basis.
Always unplug the appliance before cleaning.

Do not use steam cleaning equipment to clean the 

●

appliance.
For 

●

slight dirt

, 

fi

 rst damp with warm water, then wipe dry 

with a sponge.
For 

●

persistent dirt

, 

fi

 rst damp with warm water, then 

wipe dry with a special sponge for cleaning glass 

surfaces.
Clean 

●

remains of limestone and other residue

 using 

small amounts of a special ceramic glass cleaner or 

white vinegar, then wipe with dry cloth.
For 

●

sweets, melt aluminium and plastic

, 

fi

 rst remove 

by using a special scraper for ceramic hobs, then wipe 

with a damp cloth. If necessary, use a ceramic glass 

cleaner.

Troubleshooting

PROBLEM

TIP

The appliance does 
not switch on

•  Make sure your hob is plugged in and 
switched on
• Check if there is a power outage at 
home or in the neighbourhood
•  If after completing the above steps the 
oven still does not work, contact the serv-
ice centre.

The touch panel 
does not work

Make sure the buttons are not locked.

The touch panel 
does not work 
properly

Make sure the panel is dry and clean. 
Press the buttons with the entire surface 
of 

fi

 nger ends, not just the tips.

There are scratches 
on the glass surface

• Make sure you use suitable cooking 
vessels with 

fl

 at and smooth bottom.

•  Follow the information contained in the 
“Cleaning and Maintenance” section.

TIMER Function

The TIMER function can be used as:

countdown timer – in this case no action is performed 

●

after the lapse of the preset time (cooking zones do not 

switch off)
cooking timer – one cooking zone is switched off after 

●

the lapse of the preset time

DISPLAY

COUNTDOWN TIMER

Set the current time using TIMER buttons. Adjust time one 
minute forward/backward by single press of 

 or 

Press and hold 

 or 

 to make 10 minute forward/

backward time adjustments (the counter goes back to 0 after 
99). The time setting may be cancelled by pressing 

 and 

at the same time „

” will be displayed. After setting the 

time, the indicator will blink for 5 seconds after which the time 

setting is saved. After the lapse of the preset time, an alarm 

will sound for 30 seconds and the indicator will display „

”.

The COUNTDOWN TIMER function does not affect the 

cooking process and cooking zone power settings. 

COOKING TIMER

Set the power level for one selected cooking zone using 

or 

 buttons (the power indicator will start to blink). Set the 

time using 

 and 

 timer buttons. The time is adjusted 

one minute forward/backward by single press of 

 or 

buttons. Press and hold 

 or 

 to make 10 minute time 

adjustments (the counter goes back to 0 after 99). The time 
setting may be cancelled by pressing 

 and 

 at the 

same time („

” will be displayed). After setting the time, 

the indicator will blink for 5 seconds after which the time 

setting is saved. A dot will be displayed next to a cooking 

zone indicator to let you know that your time setting applies 

to this particular cooking zone. The cooking zone will switch 

off automatically when the preset cooking time has expired.

  The COOKING TIMER works with one selected 

cooking 

fi

 eld at a given time.

Time adjustment 

 Current time