94
1
2
3
After resetting your machine, press the program selection button and keep it
pressed down
3
.
Meanwhile, energise the machine by pressing the Power On/Off button
1
.
Keep the program selection button pressed until “SL” disappears from the
display
3
.
Release the program selection button after “SL” disappears from the
display
3
.
Your machine displays the latest entered water hardness setting.
Water hardness can be adjusted by the programme selection button
3
according to Table of Water Hardness Level Settings
After adjusting the water hardness level , press on/off button to save settings
in memory
1
.
Detergent usage
Use a detergent specifically designed for use in domestic dishwashers.
●
You can find powder,gel,and tablet detergents in the market that have been designed
●
for household dishwashers.
Detergent should be put into the compartment prior to starting the machine. Keep your
●
detergents in cool, dry places out of reach of your children.
Do not fill detergent into the detergent compartment more than required; otherwise it
●
may cause scratches on your glasses as well as lead to a poorly dissolved detergent.
Should you need more information concerning the detergent you will use, contact
●
detergent manufacturers directly.
Filling the detergent compartment
Push the latch to open the detergent container as shown in the image
1
. Detergent pod
has level lines inside. It is possible to measure the right detergent amount using these
lines. Detergent pod can take totally 40 cm
3
detergent.
Open the dishwasher detergent and pour into the larger compartment
b
25 cm
3
if your
dishes are heavily soiled or 15 cm
3
if they are less soiled
2
. If your dishes have been kept
dirty for a very long time, if there are dried food wastes on them, and if you have overly
loaded the dishwasher, pour
a
5 cm
3
detergent into the pre-wash compartment and start
your machine.
You may have to add more detergent into your machine, depending on the degree of soil
and on the water hardness level in your area.
Combined detergent
Detergent manufacturers also produce combined detergents called “2 in 1”, “3 in 1” or
“5 in 1” etc.
“2 in 1” detergents contain detergent + salt or rinse aid. When using “2 in 1” detergents
make sure to check the specifications of the tablet.
Other tablet detergents contain detergent + rinse aid + salt + varlous extra functions.
Generally, combined detergents produce sufficient results under certain usage conditions
only. Such detergents contain rinse aid and/or salt in preset amounts
Points to consider when using this type of products:
Always make sure to check the specifications of the product you will use or whether or
●
not it is a combined product.
Check if the detergent used is appropriate for the hardness of mains water that
●
machine is appertaining to.
Observe the instructions on packagings when using such products.
●
If such detergents are in the form of tablets, never put them into the interior section
●
or the cutlery basket of the dishwasher. Always put the tablets into the detergent
compartment in the detergent dispenser.
They produce good results for certain types of usage only. If you are using this type
●
of detergents, you need to contact the manufacturers and find out about the suitable
conditions of use.
When the conditions of use of such products and the machine settings are appropriate,
●
they ensure savings in salt and/or rinse aid consumption.
Contact the detergent manufacturers if you are not obtaining good wash results (if your
●
dishes stay calcareous and wet) after having used 2 in 1 or 3 in 1 detergents. The
scope of warranty for your machine does not cover any complaints caused by the use
of these types of detergents.
Recommended usage:
If you are using a combined detergent, then add rinse agent into
your machine, switch the rinse agent settings into its lowest (1) position and active the
tablet detergent button in order to obtain better results.If the water hardness level is above
level 4,then it is necessary to fill in the salt container with salt.İt is not recommended to use
combined detergents in fast programs.
WARNING: Should any problem, which you have not encountered before, arise with
the use of this type of detergents, contact the detergent manufacturers directly.
Open the testing
strip.
Run water
through your tap
for 1 min.
Keep the testing
strip in water for
1 sec.
Shake the testing strip
after taking it out of
water.
Wait for 1 min.
Make your machine’s water hardness setting according to
the result obtained through the testing strip.
Adjusting salt consumption
Table of Water Hardness Level Settings
Water hardness level
German hardness dH
French hardness dF
British hardness dE
Hardness Level Indicator
1
0-5
0-9
0-6
L1 is seen on display.
2
6-11
10-20
7-14
L2 is seen on display.
3
12-17
21-30
15-21
L3 is seen on display.
4
18-22
31-40
22-28
L4 is seen on display.
5
23-31
41-55
29-39
L5 is seen on display.
6
32-50
56-90
40-63
L6 is seen on display.
If the hardness of the water you use is above 90 dF (French hardness) or if you are using well water; you are recommended to use filter and water refinement devices.
NOTE: Hardness level is adjusted to level 3 as a factory setting.
Adjust the water softener according to how hard your tap water is.
1
2
