![background image](/i/zyxel/148476/zyxel-xs3900-48f/h/zyxel-xs3900-48f-313.png)
XS3900-48F User’s Guide
313
C
H A P T E R
4 3
Troubleshooting
This chapter offers some suggestions to solve problems you might encounter. The potential
problems are divided into the following categories.
•
Power, Hardware Connections, and LEDs
•
•
43.1 Power, Hardware Connections, and LEDs
The Switch does not turn on. None of the LEDs turn on.
1
Make sure the Switch is turned on.
2
Make sure you are using the power adaptor or cord included with the Switch.
3
Make sure the power adaptor or cord is connected to the Switch and plugged in to an appropriate
power source. Make sure the power source is turned on.
4
Turn the Switch off and on.
5
Disconnect and re-connect the power adaptor or cord to the Switch (in AC models or if the AC
power supply is connected in AC/DC models).
6
If the problem continues, contact the vendor.
One of the LEDs does not behave as expected.
1
Make sure you understand the normal behavior of the LED. See
2
Check the hardware connections. See
.
3
Inspect your cables for damage. Contact the vendor to replace any damaged cables.
4
Turn the Switch off and on (in DC models or if the DC power supply is connected in AC/DC models).