![background image](/i/zyxel/148476/zyxel-xs3900-48f/h/zyxel-xs3900-48f-076.png)
Chapter 6 Basic Setting
XS3900-48F User’s Guide
76
6.6 IP Setup
Use the IP Setup screen to configure the default gateway device, the default domain name server
and add IP domains.
Figure 25
Basic Setting > IP Setup
The following table describes the labels in this screen.
Table 16
Basic Setting > IP Setup
LABEL
DESCRIPTION
Domain Name
Server
DNS (Domain Name System) is for mapping a domain name to its corresponding IP address
and vice versa. Enter a domain name server IP address in order to be able to use a domain
name instead of an IP address.
Default
Management
Specify which traffic flow (In-Band or Out-of-band) the Switch is to send frames
originating from itself (such as SNMP traps) or frames with unknown source.
Select Out-of-band to have the Switch send the frames to the management port labelled
MGMT. This means that device(s) connected to the other port(s) do not receive these
frames.
Select In-Band to have the Switch send the frames to all ports except the management
port (labelled MGMT) to which connected device(s) do not receive these frames.
In-band Management IP Address - Use these fields to set the settings for the in-band management port.
DHCP
Client
Select this to have the in-band management port receive an IP address from an external
DHCP server.
Static IP
Address
Select this to give the in-band management port a fixed IP address, subnet mask and
default gateway.