Conventional Ovens

&:

  Oven  lamp  and  warning  lamps  light  on. 

The heating elements are out of operation.

5 . 3   Operating the ovens - controlled by single knob

*  The oven/or grill knob can only be rotated clockwise 

from the OFF position .

*  Turn the oven on by rotating the oven knob clockwise.

*  Adjustment  of  the  temperature  in  the  oven  is  also  made 

by using this knob.

*The temperature values are written on the oven control 

knob. The amber temperature indicator light will glow 

until the pre-set temperature set using the oven knob is 

reached. Once the temperature has been reached, the 

amber light will go off and then cycle on and off during 

use to maintain the pre-set temperature. The table is a 

guide on cooking different types of food with the related 

cooking temperatures.

*  You  can  obtain  additional  energy  savings  by  switching 

off  the  oven  five  minutes  prior  to  the  end  of  the  cooking 

period, provided that the oven door is not opened

*  Ensure you stand back from the appliance when opening 

the  oven  door  to  allow  any  build  up  of  steam  or  heat  to 

escape.

If,  whilst  cooking,  steam  produced  comes  in  to  contact 

with  cool  surfaces  on  the  outside  of  the  appliance,  it  will 

condense and produce water droplets.

This is quite normal and is not a fault.

(Temperature  range): 

The lower  and upper 

heating  element  are  on  under  the  thermostat 

control.

fp Only the lower heating element is 

controlled.

(□ ): Upper heating element is controlled

(□ ): Means only the grill heating element is 

on.

You must bring to the heating control knob to 

the maximum temperature.

Means both grill element and rôtisserie 

function are on.

To  set  the  knob  "0"  position  after  the  stage  □, 

turn the knob in the counter-clockwise direction.

Turbo Ovens

(B ): Oven lamp, warning lamps and 

fan are on.

[Temperatuire range): 

The turbo 

heating element is on under the 

thermostat control.

Q): Means only the grill heater and 

lamps are on.

You must bring to the heating control 

knob to the maximum temperature.

fl^l)  Means  both  grill  element  and 

rôtisserie function are on.

To  set  the  knob  "0"  position  after  the 

stage  □,  turn  the  knob  in  the  counter­

clockwise direction.

Burning off the protective coating process.

In  order  to  burn  off  the  protective  coating  remove  shelves  and  baking  tray  by  turning  your  oven  to  250“C 

for to 30 minute periods without putting anything into it.

You must ensure this operation is conducted in a well ventilaled area.

16