г

Part 9: Gas conversion

Your  cooker  can  operate  both 

Natural  Gas  and  LPG.  You  can 
convert  by  changing  the  gas 

source and the top burner, oven 

and  g r i l l  

i n j e c t o r s .   T h e  

replacement  procedure  of  the 

injectors  are  explained  below. 

Call  authorized  Service  for  gas 
convertion.

Replacement of the 

top burner injector

Take  off  the  burner  head  and 

burner cap before starting this 
procedure. Then:

1. 

Remove the injector inside 

the top burner with a suitable 

bit. Later, install the new 
injector by covering the injector 

threads with leakage 

preventing

material. 

Flame failure 

device

spark plug

Reduced Tap Flow

1.Ignite the burner that should be 

adjusted, turn the knob to the reduced 

position, pull and take the knob off.

2. 

With a screwdriver, make the tap 

reduced flow adjustment from the 
injector that is on the gas tap (only 

the head is visible with the bolt shape).

It  is  sufficient  to  tight  to  s c r e w  

completely,  in  butane/propane  gas. 
For  the natural gas, you should turn 

the screw counter-clockwise once. The 

normal  length  of  a  straight  flame  in 

the  reduced  position  should  be  6  - 

7mm.
If the flame is higher than the desired 

position, turn the screw clockwise. If 
its smaller to the opposite.
For the last control of the burning of 

the  cooker,  bring  the  cooker  high- 

flame and reduced positions and check 

whether the f l a m e  i s  on or off.

26